Home » ECM 2016 » Section A: Materials for Energy Applications » Paper A003

[A003] Experimental Study on T-shaped Joints Composed of Plaster-Concrete Compound Panels

1 School of Civil Engineering, Tianjin University, Tianjin 300072;
2 Key Laboratory of Coastal Civil Engineering Structure and Safety, Tianjin University, Ministry of Education, Tianjin 300072, China
* Author to whom correspondence should be addressed.
3 May 2016
534 views
0/5 rated ( 0 ratings )

Abstract

A hidden concrete column was built at the core of the T-shaped joints composed of plaster-concrete compound panels in order to study their earthquake resistant behavior. In this paper, earthquake resistance tests were performed on two types of composite T-shaped joints, six samples in total, in which the horizontal steel bars were embedded and not embedded in their core, to analyze the mechanical deformation, cracking, hysteretic behavior, ductility, and stiffness degeneration of the composite T-shaped joints as well as their energy dissipation properties such as damping coefficient, energy dissipation coefficient, and power ratio coefficient. The two types of composite joints composed of interior and exterior compound walls were found to have good mechanical properties. A comparison of the various indicators for the two types of T-shaped joints revealed that embedding the horizontal steel bars embedded in the web and flange of the T-shaped joints in their core can help improve the earthquake resistance and energy dissipation properties of the composite T-shaped joints.

Keywords

Compound walls; specially shaped column; T-shaped joints; tests; energy dissipation; cracks

Cite this article as

Ma, S.; Nan, J. Experimental Study on T-shaped Joints Composed of Plaster-Concrete Compound Panels. In Proceedings of the 2nd Int. Electron. Conf. Mater., 2–16 May 2016; Sciforum Electronic Conference Series, Vol. 2, 2016 , A003; doi:10.3390/ecm-2-A003

Comments on Experimental Study on T-shaped Joints Composed of Plaster-Concrete Compound Panels

Sponsors