Please login first
Nukman Bin Yusoff  - - - 
Top co-authors See all
Siti Zawiah Md Dawal

123 shared publications

Department of Mechanical Engineering, Faculty of Engineering, University of Malaya. 50603 Kuala Lumpur, Malaysia

S. Ahmed

17 shared publications

Manufacturing Systems Integration (MSI), Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia

Prof. Engr. Dr. Md. Abdul Wazed

16 shared publications

University of Malaya

Imtiaz Ahmed Choudhury

6 shared publications

Faculty of Engineering, Department of Mechanical Engineering, Centre for Product Design and Manufacturing (CPDM), University of Malaya, 50603 Kuala Lumpur, Malaysia, Tel. +60 3 79677625; Fax: +60 3 79675317

M. Abdul Quader

6 shared publications

Manufacturing System Integration (MSI), Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia

17
Publications
0
Reads
0
Downloads
43
Citations
Publication Record
Distribution of Articles published per year 
(2009 - 2018)
Total number of journals
published in
 
14
 
Publications See all
Article 0 Reads 0 Citations Anthropometric measurements among four Asian countries in designing sitting and standing workstations Nurul Izzah Abd Rahman, Siti Zawiah Md Dawal, Nukman Yusoff,... Published: 01 January 2018
Sādhanā, doi: 10.1007/s12046-017-0768-8
DOI See at publisher website
Article 0 Reads 0 Citations An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis M. S. H. Bhuiyan, I. A. Choudhury, M. Dahari, Y. Nukman, Sit... Published: 05 May 2017
Applied Bionics and Biomechanics, doi: 10.1155/2017/7595642
DOI See at publisher website PubMed View at PubMed ABS Show/hide abstract
A gear-based knee joint is designed to improve the performance of mechanical-type above-knee prostheses. The gear set with the help of some bracing, and bracket arrangement, is used to enable the prosthesis to follow the residual limb movement. The motion analysis and finite-element analysis (FEA) of knee joint components are carried out to assess the feasibility of the design. The maximum stress of 29.74 MPa and maximum strain of 2.393e−004 are obtained in the gear, whereas the maximum displacement of 7.975 mm occurred in the stopper of the knee arrangement. The factor of safety of 3.5 obtained from the FE analysis indicated no possibility of design failure. The results obtained from the FE analysis are then compared with the real data obtained from the literature for a similar subject. The pattern of motion analysis results has shown a great resemblance with the gait cycle of a healthy biological limb.
Article 0 Reads 10 Citations Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condit... Md. Sayem Hossain Bhuiyan, Imtiaz Ahmed Choudhury, Nukman Yu... Published: 01 October 2016
Measurement, doi: 10.1016/j.measurement.2016.06.006
DOI See at publisher website
Article 0 Reads 8 Citations Present needs, recent progress and future trends of energy-efficient Ultra-Low Carbon Dioxide (CO 2 ) Steelmaking (ULCOS... M. Abdul Quader, Shamsuddin Ahmed, S.Z. Dawal, Y. Nukman Published: 01 March 2016
Renewable and Sustainable Energy Reviews, doi: 10.1016/j.rser.2015.10.101
DOI See at publisher website
BOOK-CHAPTER 0 Reads 0 Citations The Relationship Between Manufacturing and Design for Manufacturing in Product Development of Natural Fibre Composites S. M. Sapuan, Nukman Bin Yusoff Published: 01 January 2015
Manufacturing of Natural Fibre Reinforced Polymer Composites, doi: 10.1007/978-3-319-07944-8_1
DOI See at publisher website
Article 0 Reads 2 Citations Selecting a CNC Machine Tool Using the Intuitionistic Fuzzy TOPSIS Approach for FMC Nguyen Huu Tho, Siti Zawiah Md Dawal, Nukman Yusoff, Farzad ... Published: 01 April 2013
Applied Mechanics and Materials, doi: 10.4028/www.scientific.net/amm.315.196
DOI See at publisher website
Top