Please login first
Denis Spitzer  - - - 
Top co-authors See all
Julien Parmentier

67 shared publications

Université de Strasbourg; Université de Haute-Alsace, Institut de Science des Matériaux de Mulhouse, UMR 7361, CNRS; 15 rue Jean Starcky, BP 2488 68057 Mulhouse Cedex France

Tanja Deckert‐Gaudig

67 shared publications

Leibnitz Institute of Photonic Technology IPHT, Albert-Einstein-Strasse 9, 07745 Jena, Germany

Habiba Nouali

28 shared publications

Université de Haute Alsace (UHA), Axe Matériaux à Porosité Contrôlée (MPC), Institut de Science des Matériaux de Mulhouse (IS2M), UMR CNRS 7361, 3 bis rue Alfred Werner, F-68093 Mulhouse, France

Vincent Pichot

27 shared publications

NS3E “Nanomatériaux pour les Systèmes Sous Sollicitations Extrêmes” UMR 3208 ISL/CNRS/UNISTRA); French German research insitute of Saint-Louis (ISL); 5 rue du général Cassagnou 68301 Saint-Louis France

Volker Deckert

19 shared publications

Leibnitz Institute of Photonic Technology IPHT, Albert-Einstein-Strasse 9, 07745 Jena, Germany

68
Publications
0
Reads
0
Downloads
154
Citations
Publication Record
Distribution of Articles published per year 
(2003 - 2018)
Total number of journals
published in
 
30
 
Publications See all
Article 0 Reads 0 Citations Synthesis of zinc oxide nanorods or nanotubes on one side of a microcantilever Laurent Schlur, Jeremy Ramos Calado, Denis Spitzer Published: 08 August 2018
Royal Society Open Science, doi: 10.1098/rsos.180510
DOI See at publisher website ABS Show/hide abstract
Cantilevers are really promising sensitive sensors despite their small surface. In order to increase this surface and consequently their sensitivity, we nanostructured them with zinc oxide (ZnO) nanorods or nanotubes having a diameter of approximately 100 nm and a length of 1 µm. The nanostructure growth was first optimized on a silicon wafer and then transferred to the cantilevers. The ZnO nanorods were grown in an autoclave. The centre of the nanorods was dissolved in order to obtain nanotubes. The dissolution conditions were optimized in order to have the longest etching depth. After 1.25 h in a dissolution solution containing 0.75 wt% of NH3(aq) and 0.75 wt% of cetyltrimethyl ammonium bromide, the longest etching depth was obtained. After the transfer of the syntheses to the cantilevers, nanorods/nanotubes grew on both sides of the cantilever, which prevents the reflection of the laser allowing the resonance frequency measurement. A masking procedure was developed in order to avoid the growth on one face of the cantilever of zinc oxide nanostructures. As far as the authors are concerned, for the first time, zinc oxide nanotubes were synthesized on only one face of cantilevers with optical readout.
Article 0 Reads 0 Citations Tuning physical surface properties of tin dioxide nanopowders using zinc oxide as template Pierre Gibot, Virginie Goetz, Martin Klaumünzer, Fabien Schn... Published: 01 August 2018
Solid State Sciences, doi: 10.1016/j.solidstatesciences.2018.05.012
DOI See at publisher website
Article 0 Reads 0 Citations Nanocrystallisation of Ammonium DiNitramide (ADN) by Spray Flash Evaporation (SFE) Jean-Edouard Berthe, Fabien Schnell, Yannick Boehrer, Denis ... Published: 24 May 2018
Propellants, Explosives, Pyrotechnics, doi: 10.1002/prep.201800039
DOI See at publisher website
Article 2 Reads 2 Citations Cu(OH)2 and CuO Nanorod Synthesis on Piezoresistive Cantilevers for the Selective Detection of Nitrogen Dioxide Laurent Schlur, Manuel Hofer, Ahmad Ahmad, Karine Bonnot, Ma... Published: 05 April 2018
Sensors, doi: 10.3390/s18041108
DOI See at publisher website ABS Show/hide abstract
Self-controlled active oscillating microcantilevers with a piezoresistive readout are very promising sensitive sensors, despite their small surface. In order to increase this surface and consequently their sensitivity, we nanostructured them with copper hydroxide (Cu(OH)2) or with copper oxide (CuO) nanorods. The Cu(OH)2 rods were grown, on a homogeneous copper layer previously evaporated on the top of the cantilever. The CuO nanorods were further obtained by the annealing of the copper hydroxide nanostructures. Then, these copper based nanorods were used to detect several molecules vapors. The results showed no chemical affinity (no formation of a chemical bond) between the CuO cantilevers and the tested molecules. The cantilever with Cu(OH)2 nanorods is selective to nitrogen dioxide (NO2) in presence of humidity. Indeed, among all the tested analytes, copper hydroxide has only an affinity with NO2. Despite the absence of affinity, the cantilevers could even so condensate explosives (1,3,5-trinitro-1,3,5-triazinane (RDX) and pentaerythritol tetranitrate (PETN) on their surface when the cantilever temperature was lower than the explosives source, allowing their detection. We proved that in condensation conditions, the cantilever surface material has no importance and that the nanostructuration is useless because a raw silicon cantilever detects as well as the nanostructured ones.
Article 2 Reads 0 Citations Aluminum nanopowder: A substance to be handled with care Cédric Martin, Marc Comet, Fabien Schnell, Jean-Edouard Bert... Published: 01 January 2018
Journal of Hazardous Materials, doi: 10.1016/j.jhazmat.2017.08.018
DOI See at publisher website PubMed View at PubMed
Article 0 Reads 0 Citations Nanothermite with Meringue-like Morphology: From Loose Powder to Ultra-porous Objects Cédric Martin, Marc Comet, Fabien Schnell, Denis Spitzer Published: 24 December 2017
Journal of Visualized Experiments, doi: 10.3791/56479
DOI See at publisher website
Top