EventsThe 5th International Electronic Conference on Biosensors
Published
This submission belongs to the session E. Nanomaterials and Smart Surfaces in Biosensors of the event The 5th International Electronic Conference on Biosensors
Published date
02 May, 2025
Academic Editor
author-avatarMichael Thompson
Citation
Marta Varone, Elisa Lazzarini, Andrea Pace, Chiara Mattioli, Martina Zangheri, Donato Calabria, Massimo Guardigli, Marco Frasconi, Mara Mirasoli, A chemiluminescence nanocellulose-paper-based analytical device for point-of-care detection of Alzheimer disease biomarkers, in Proceedings of The 5th International Electronic Conference on Biosensors, 26 May–28 May 2025, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

A chemiluminescence nanocellulose-paper-based analytical device for point-of-care detection of Alzheimer disease biomarkers

image
image
image
1. Department of Chemistry “Giacomo Ciamician”, Alma Mater Studiorum, University of Bologna, via Piero Gobetti 85, 40129 Bologna, Italy, Italy
2. Department of Chemical Sciences, University of Padova, 35131 Padova, Italy, Italy
Abstract

Cellulose is one of the most abundant biopolymers, and its many properties make it suitable for application in numerous fields, such as sensor and biosensor fabrication. It is indeed biodegradable and renewable, nontoxic, biocompatible, and widely available at low cost (https://doi.org/10.3390/chemosensors10090352). In addition, cellulose boasts different structural arrangements such as Cellulose Nanocrystals (CNCs), which are among the most promising cellulose-derived nanomaterials for applications in biosensors. In fact, CNCs can be formulated into thin films to be used as support material for the immobilization of proteins (enzymes, antibodies, etc.) (https://doi.org/10.3390/chemosensors10090352, https://doi.org/10.1016/j.sbsr.2020.100368). In this work, we exploited antibody-functionalized CNCs to develop a microfluidic paper-based analytical device (µPAD) for the detection of myeloperoxidase blood levels, which have been shown to be altered in patients with Alzheimer's disease (AD) (https://doi.org/10.5539/gjhs.v6n5p87, https://doi.org/10.1111/j.1471-4159.2004.02527.x, https://doi.org/10.1016/j.arr.2020.101130). In particular, upon their covalent functionalization with anti-myeloperoxidase antibody, CNCs were deposited onto filter paper, thus providing a uniform and stable functionalized layer. Subsequently, employing the origami format, myeloperoxidase contained in the sample was captured by the immobilized antibody and then detected, exploiting its ability to catalyse the luminol/hydrogen peroxide chemiluminescence reaction. Emitted photons were detected by employing a portable highly sensitive charge-coupled device (CCD) camera and analyzed to obtain quantitative information. A limit of detection of 5.8 ng/mL was obtained, which enables clear distinction between healthy and AD patients’ myeloperoxidase blood levels (https://doi.org/10.3233/jad-131469). In addition, the selectivity of the system was evaluated by testing the possible interference of haemoglobin, which is also able to catalyse the chemiluminescence reaction. In the future, the same approach will be used for developing origami µPADs for detecting other AD biomarkers exploiting chemiluminescence sandwich immunoassays.

This research is supported by the PRIN2022 project 2022WN89PC “Biomimetic sensing platforms for the detection of Alzheimer's disease related biomarkers”.

Keywords
Biosensors
Chemiluminescence
Cellulose Nanocrystals
Origami µPAD
Alzheimer's disease biomarkers
Investigation of kinetic parameters of chloramphenicol and its conjugates’ interaction with monoclonal antibodies using label-free biosensors based on low-coherence interferometry
Porous Bi₂O₃ Nanosheets for Formaldehyde Detection: A Novel Approach for Non-Invasive Nasal Cancer Detection via Exhaled Human Breath