Thermographic evaluation of thermophysical properties in bio-based foams for automotive interior components

This study investigates the use of bio-based polyurethane foams (PUFs) containing phase change material (PCM) microparticles as a sustainable alternative for the automotive sector. These foams are synthesized using polyols derived from waste cooking oil (WCO), aligning with circular economy principles.

To evaluate the thermophysical properties of these materials and, more in general, their thermal behaviour, the use of non-destructive thermographic techniques has been proposed. This technique enables a rapid, full-field thermal analysis without physical contact, making it especially suitable for porous and heterogeneous structures like foams.

As a reference, both virgin and foams with PCM were characterized in terms of density and thermal conductivity using well-established methods. Then, Lock-in thermography has been used as the first attempt technique to investigate variations in thermal behavior due to different thermophysical material properties based on the thermal response in transmission configuration.

The thermographic approach proves to be an effective tool not only for assessing thermal behavior but also for supporting quality control and process optimization of sustainable polymeric materials.