EventsThe 18th Advanced Infrared Technology and Applications (AITA2025)
Published
This submission belongs to the session Session 2. Session 2 (Under 35) of the event The 18th Advanced Infrared Technology and Applications (AITA2025)
Published date
29 Aug, 2025
Academic Editor
author-avatarHirotsugu Inoue
Citation
Dan Uchimura, An Experimental Study on Monitoring the Filling Status of Concrete in Thick Wall with Steel Plates on the Outside using Infrared Cameras, in Proceedings of The 18th Advanced Infrared Technology and Applications (AITA2025), Kobe, Hyogo, 15 September–19 September 2025, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

An Experimental Study on Monitoring the Filling Status of Concrete in Thick Wall with Steel Plates on the Outside using Infrared Cameras

1. Kajima Corporation, Japan
Abstract

This paper presents an experimental study using test specimens to demon-strate that the filling status of concrete on the inner surface ofathick wall’s steel platescan be monitored on the outside using infrared cameras. In previous research, it wasfeasible to monitor the filling statusof concrete onthewallwith a steel plate thickness of10mmor lesson the outside using infrared camera.In this study, the steelplate thick-ness is increased from10mm to 22 mm and 32 mm.

Keywords
Infrared thermography
non - destructive test
internal defects
concrete
Pulse Compression Favorable Thermal Wave Imaging Techniques for Identification of Sub-surface Defects in Glass Fiber Reinforced Polymer Materials
Development of detection system for fatigue cracks on orthotropic steel deck using infrared thermography and inspection results