EventsThe 12th International Electronic Conference on Sensors and Applications
Published
This submission belongs to the session S3. Sensor Networks, IoT, Smart Cities and Health Monitoring of the event The 12th International Electronic Conference on Sensors and Applications
Published date
07 Nov, 2025
Academic Editor
author-avatarFrancisco Falcone
Citation
Dr. Sundus Ali, Tanzila -, Dr. Muhammad Imran Aslam, Dr. Irfan Ahmed, Ayesha Ahmed, Prototyping LoRaWAN-Based Mobile Air Quality Monitoring System for Public Health and Safety, in Proceedings of The 12th International Electronic Conference on Sensors and Applications, 12 November–14 November 2025, MDPI: Basel, Switzerland, doi: 10.3390/ECSA-12-26510
Share
Email
Facebook
Twitter
LinkedIn

Prototyping LoRaWAN-Based Mobile Air Quality Monitoring System for Public Health and Safety

Tanzila - 1
Ayesha Ahmed 4
1. Department of Telecommunications Engineering, NED University of Engineering and Technology, Karachi, Pakistan
2. NED University of Engineering and Technology, Pakistan
3. Department of Physics, NED University of Engineering and Technology, Karachi, Pakistan
4. Department of Computer Science and Information Technology, NED University of Engineering and Technology, Karachi, Pakistan
Abstract

In this paper, we have presented the design, prototyping and working of a cost-effective, energy-efficient, and scalable air quality monitoring system (AQMS), enabled by Low power, long Range Wide Area Network (LoRaWAN), an Internet of Things (IoT) technology designed to provide connectivity for massive machine type communication applications. The growing threat of air pollution necessitates outdoor and mobile environmental monitoring systems to provide real-time, location-specific data, which are unfortunately not possible with fixed monitoring devices. For our AQMS, we have developed two custom-built sensor nodes. First node is equipped with Nucleo-WL55JC1 microcontroller and sensors to measure temperature, humidity, and carbon dioxide (CO₂), while other node is equipped with Arduino MKR WAN 1310 controller with sensors to measure carbon monoxide (CO), ammonia (NH₃), and particulate matter (PM2.5 and PM10). These sensor nodes connect to a WisGate Edge LoRaWAN gateway, which aggregates and forwards the sensor data to The Things Network (TTN) for processing and cloud storage. The final visualization is handled via the Ubidots IoT platform, allowing for real-time visualization of environmental data. Besides environmental data, we were able to acquire received signal strength indicator, signal-to-noise ratio as well as frame counter which shows the number of packets received by the gateway. We performed laboratory testing, which confirmed reliable communication, with a packet delivery rate of 98% and minimal average latency of 2.5 seconds. Both nodes operated efficiently on battery power, with the Nucleo-WL55JC1 consuming an average of 20 mA in active mode, while the Arduino MKR WAN 1310 operated at 15 mA. These values ensured extended operation for remote deployment. The system’s low power consumption and modular architecture make it viable for smart city applications and large-scale deployments in resource-constrained areas.

Keywords
sensors
LoRaWAN
air quality
internet of things
mobile
public health
Manuscript
Development of an Autonomous Unmanned Ground Vehicle for Artistic Landscaping
A 13G to 24.8 GHz Broadband Power Amplifier with 23% PAE for Sensor Applications