Enhancing Rain Sensor Sensitivity Using a Nylon Mesh Overlay: A Low-Cost and Practical Solution

Monitoring humidity is essential for the protection and long-term preservation of historical monuments and cultural heritage structures, particularly those made of stone, marble, or iron. Excess moisture can accelerate material degradation and compromise structural integrity. This paper presents an alternative, low-cost method for enhancing the sensitivity of a raindrop sensor, aiming to detect micro-droplets such as early morning dew—an important factor in environmental monitoring around such sensitive sites. The proposed method involves covering the sensor’s surface with a fine nylon mesh, such as a stocking, which allows tiny water droplets to accumulate and spread more effectively across the sensor. This modification improves the electrical conductivity between the copper tracks when droplets are present, enabling the sensor to detect moisture levels that would otherwise go unnoticed. Experimental results demonstrate that the modified sensor performs significantly better than the original, unaltered version, offering greater sensitivity and consistency in its readings. The sensor responds more reliably to low volumes of moisture without requiring internal changes to its circuitry, making it both practical and cost-effective. The outcomes of this work are encouraging, suggesting that the approach is suitable for moisture detection in both research and real-world conservation scenarios. It provides a simple and scalable solution for integrating humidity monitoring into broader environmental sensing systems.