IMPROVING ENERGY EFFICIENCY IN METALWORKING MACHINE TOOLS: VECTOR CONTROL OF ELECTRIC DRIVES USING A FREQUENCY CONVERTER AND SYSTEM MODELING

Abstract. Today, the mechanical processing and treatment of metals are of great importance in the development of industrial sectors. Therefore, in the process of mechanical metalworking, a need arises to create new modern equipment or improve existing devices. In industrial sectors, there are several problems with devices and machine tools (such as the 1K62 lathe-screw cutting machine) used in the mechanical processing of metals, including the turning of cylindrical and conical parts, machining their external and internal surfaces, thread cutting, and surface polishing. Specifically, it is difficult to precisely control the spindle speed during the metal-cutting process; energy consumption is high due to the high starting current (5-7 times the nominal value) of asynchronous motors during machine operation; the vibration level is high during operation; and there is no torque control. These problems can be eliminated by using scalar (simple) and vector control methods of frequency converters. In this case, the vector control method was used in the research because it has several advantages as a solution to these problems. As a result, it was demonstrated during the research process that the spindle speed can be reduced to 12.5 rpm. This made it possible to precisely control the spindle speed, maintain torque at low speeds, increase energy efficiency, reduce the load on mechanical transmissions, and ensure the stability of the cutting process. In addition, by operating the asynchronous electric motor through a frequency converter, it is possible to increase the efficiency and service life of such machine tools. This is of significant importance in the process of optimizing the electrical power supply system of the machine tool.