EventsThe 13th International Electronic Conference on Sensors and Applications
Published
with-doi10.3390/engproc2026163097 (registering DOI)
This submission belongs to the session S2. Physical Sensors of the event The 13th International Electronic Conference on Sensors and Applications
Published date
16 Nov, 2026
Academic Editor
author-avatarStefano Mariani
Citation
Ilya Galaktionov, Vladimir Toporovsky, Development of a High-Speed Four-Channel Single-Sensor Shack–Hartmann Metrology Device for Multispectral Wavefront Sensing of Laser Beams, in Proceedings of The 13th International Electronic Conference on Sensors and Applications, 18 November–20 November 2026, MDPI: Basel, Switzerland, doi: 10.3390/engproc2026163097
Share
Email
Facebook
Twitter
LinkedIn

Development of a High-Speed Four-Channel Single-Sensor Shack–Hartmann Metrology Device for Multispectral Wavefront Sensing of Laser Beams

image
image
1. Department of Optical and Quantum Communications, Moscow Technical University of Communications and Informatics, Aviamotornaya Str., Bld. 8a, Moscow 111024, Russia
2. Department of Higher Mathematics, MIREA—Russian Technological University, 78 Vernadsky Avenue, Moscow 119454, Russia
Abstract

Accurate measurement and characterization of high-power laser beams is essential for free-space optical communication, wireless energy transmission, atmospheric turbulence compensation, laser cutting, and space debris removal. Shack‑Hartmann wavefront sensors are widely used, but conventional systems require multiple separate sensors when characterizing several independent beams, in single‑shot spatio‑temporal diagnostics of laser pulses. This requirement complicates experimental setups, increases hardware costs, and introduces synchronization challenges.

To address these limitations, we developed a four‑channel single‑sensor Shack‑Hartmann metrology device. The system employs a single high‑speed digital camera with 1280×1024 pixels and a 7×5 mm sensor area, equipped with a lenslet array having a pitch of 103.6 μm and 70×50 microlenses. We increased the camera frame rate to 1200 fps, enabling high‑speed wavefront measurements. The entire sensor aperture is logically partitioned into four independent regions, each serving as a separate aperture for wavefront measurement of a laser beam. This approach enables simultaneous acquisition and processing of wavefront data from four distinct optical channels using a physical sensor, simplifying hardware integration and reducing system complexity.

A software application was developed using .NET C# with a WPF‑based graphical user interface, implementing MVC/MVVM design patterns. We incorporated parallel computation using Task Parallel Library for calculating focal‑spot shifts, achieving a calculation time of 1 ns per pixel on an Intel i7‑2xxx CPU. The software supports parallel computation for all four channels and allows mask configuration per channel to accommodate different beam profiles. The system captures and processes multi‑channel interference patterns, providing wavefront reconstruction via Zernike polynomial decomposition for each beam.

During laboratory tests, we compared measurements with a reference wavefront; the error was less than 2 %, and the reference RMS was 0.02 µm. This four‑channel device offers a cost‑effective, compact solution for multispectral wavefront sensing, enabling single‑shot spatio‑temporal characterization and multi‑beam adaptive optics in high‑power laser systems.

Keywords
Shack-Hartmann sensor
parallel computation
wavefront
laser beams
multi-channel sensor
spatio-temporal diagnostics
Manuscript
sciforum-198846engproc-163-00097.pdf
Advanced M2 Beam Quality Factor Measurement Using a Microlens Array: A Comparative Study of Truncated and Non-Truncated Beam Analysis Algorithms
A Multimodal Sensor Fusion Framework for Upper-Limb Rehabilitation Robotics: Design and Validation Using the Ninapro Database