EventsThe 13th International Electronic Conference on Sensors and Applications
Published
This submission belongs to the session S6. Electronic Sensors, Devices, and Systems of the event The 13th International Electronic Conference on Sensors and Applications
Published date
16 Nov, 2026
Academic Editor
author-avatarJean-Marc Laheurte
Citation
Emmanouil Missiris, Apostolos Apostolakis, Dimitris Barmpakos, Grigoris Kaltsas, Flexible electronic platform for real-time monitoring of skin conductance and temperature, in Proceedings of The 13th International Electronic Conference on Sensors and Applications, 18 November–20 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Flexible electronic platform for real-time monitoring of skin conductance and temperature

Emmanouil Missiris 1
image
image
image
1. microSENSES Laboratory, Department of Electrical and Electronics Engineering, University of West Attica, Athens, Greece
Abstract

Over the past decade, wearable, flexible, and portable sensing devices have attracted increasing attention due to their potential applications in diverse fields, including healthcare monitoring, soft robotics, AI, HMIs etc. Among these applications, healthcare monitoring has emerged as one of the most rapidly growing research areas as the real-time monitoring of physiological signals can provide valuable insights for disease prevention, early diagnosis, and self-health management. In this work, we present a fully custom portable platform for the real-time monitoring of skin conductance and skin temperature integrated with a dedicated mobile application and Bluetooth connectivity. For the realization of the proposed platform, a custom laboratory-scale PCB was designed and fabricated. A commercial microcontroller was used for data acquisition, processing, and wireless transmission, allowing real-time monitoring and data storage. The flexible module was fabricated on a Kapton substrate (25 μm thick) with pre-patterned copper tracks (9 μm thick). The copper electrodes were utilized for skin conductance measurements, while inkjet-printed PEDOT:PSS sensing elements deposited on the same substrate served as temperature sensors. Electrical interconnection between the flexible sensing component and the electronic circuitry was achieved through an FPC connector. Finally, a lightweight mobile application was developed to provide real-time visualization of the signals, system control, and data storage capabilities. Following calibration of the electrodes and the microcontroller-based acquisition unit, preliminary experiments were conducted to evaluate the platform performance. Skin conductance measurements were obtained from a single participant in six different hand positions, while skin temperature was monitored at the inner wrist. The main novelty of the proposed system lies in the integration of skin conductance and temperature sensing into a single flexible platform with on-board data acquisition and mobile visualization. The obtained results demonstrated full system functionality and highlighted the potential of the proposed platform as a cost-effective, portable and reliable solution.

Keywords
Wearable electronics
flexible electronics
PEDOT:PSS
Kapton
temperature sensors
skin conductance
Manuscript
Messiris et al..pdf
Poster
Messiris et al..pdf
FT-IR micro-spectroscopy as a label-free biosensing approach for detecting protein secondary-structure alterations in intact cells
Dopamine detection using CuO-coated Au interdigitated electrodes on a silicon substrate