EventsThe 13th International Electronic Conference on Sensors and Applications
Published
This submission belongs to the session S3. Sensor Networks, IoT, Smart Cities and Health Monitoring of the event The 13th International Electronic Conference on Sensors and Applications
Published date
16 Nov, 2026
Academic Editor
author-avatarFrancisco Falcone
Citation
Shelishiyah Raymond, Venkata Prasad Pandiarajan, Yogeshwaran Udayakumar, Shreya Shivakumar, Deepa Beeta Thiyam, Morse Code Translator Using an Infrared Sensor Through Eye-Blink Detection, in Proceedings of The 13th International Electronic Conference on Sensors and Applications, 18 November–20 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Morse Code Translator Using an Infrared Sensor Through Eye-Blink Detection

Yogeshwaran Udayakumar 1
1. Department of Biomedical Engineering, Faculty of Engineering and Technology, SRM Institute of Science and Technology - Ramapuram Campus, Chennai - 600089, India
2. Department of Biomedical Engineering, School of Bioengineering, Vel Tech Rangarajan Dr. Sagunthala R & D Institute of Science and Technology, Chennai - 600062, India
Abstract

Communication is a fundamental requirement for survival and overall well-being. However, people who are affected by neurological disorders and motor impairments face major challenges in verbal communicating effectively. Besides physiological limitations, an alternative for verbal communication may also be required in various situations. Several assistive communication technologies like EEG-based systems, EOG systems, and camera-based eye tracking methods have been developed to address these challenges. However, these systems are expensive and require complex hardware and software processing limiting their applicability. The current work proposes a low-cost Morse Code Translator using an IR eye-blink sensor mounted on eye glasses to provide an efficient and user-friendly communication solution. The system uses an infrared sensor to detect voluntary eye blinks and then interpreted to Morse Code. Short blinks are interpreted as Morse code dots while long blinks are interpreted as dashes. Arduino Uno is used for processing the blink duration and converts Morse code sequences into readable text characters. The translated output is displayed on the LCD display while an integrated buzzer provides an emergency alert mechanism. The system generates long buzzer signal on detecting five consecutive blinks to request immediate assistance. Experimental observations indicate an overall accuracy of 94% with response time between 0.8 and 1.2 seconds. The proposed model is portable, cost-effective, low-power, and suitable as an alternative for verbal communication.

Keywords
Morse Code
Eye Blink Sensor
Assistive Communication
Wearable Technology
Human-Computer Interaction
Sensor-Based System
Manuscript
[Sciforum-193705] - [Manuscript PDF] - [Poster contribution - assigned].pdf
An Energy- and Area-Efficient Modified Blowfish Encryption Scheme for Secure Healthcare IoT Sensor Nodes
Automated Root-Zone Cooling in Vertical Aeroponics: An Engineering Framework for Cultivating Temperate Crops in Tropical Lowlands