EventsThe 2nd International Conference on Bioengineering
Published
This submission belongs to the session S5. Biomechanics and Sports Medicine of the event The 2nd International Conference on Bioengineering
Published date
16 Nov, 2026
Contribution&Funding
Conceptualization,
[Rodrigo Jorge Lobato Pozo] ; [Mattias Alonso Valencia Rodríguez]
Methodology,
[Rodrigo Jorge Lobato Pozo] ; [Mattias Alonso Valencia Rodríguez]
Software,
[Rodrigo Jorge Lobato Pozo] ; [Mattias Alonso Valencia Rodríguez]
Validation,
[Rodrigo Jorge Lobato Pozo] ; [Mattias Alonso Valencia Rodríguez]
Formal analysis,
[Rodrigo Jorge Lobato Pozo] ; [Mattias Alonso Valencia Rodríguez]
Investigation,
[Rodrigo Jorge Lobato Pozo] ; [Mattias Alonso Valencia Rodríguez]
Resources,
[Rodrigo Jorge Lobato Pozo] ; [Mattias Alonso Valencia Rodríguez]
Data curation,
[Rodrigo Jorge Lobato Pozo] ; [Mattias Alonso Valencia Rodríguez]
Writing - original draft,
[Rodrigo Jorge Lobato Pozo] ; [Mattias Alonso Valencia Rodríguez]
Writing - review,
[editing] ; [Rodrigo Jorge Lobato Pozo] ; [Mattias Alonso Valencia Rodríguez]
Supervision,
[Wendy Irene Padilla Huamantico] ; [Carmen Clotilde Mayorga Martinez]
Funding: --
Citation
Wendy Irene Padilla Huamantico, Rodrigo Jorge Lobato Pozo, Mattias Alonso Valencia Rodríguez, Carmen Clotilde Mayorga Martinez, Real-Time Monitoring of Cervical Movements Using Two Nodes Inertial Sensor System, in Proceedings of The 2nd International Conference on Bioengineering, Barcelona, 10 November–13 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Real-Time Monitoring of Cervical Movements Using Two Nodes Inertial Sensor System

Wendy Irene Padilla Huamantico 1
Mattias Alonso Valencia Rodríguez 1
Carmen Clotilde Mayorga Martinez 1
1. School of Biomedical Engineering, Faculty of Engineering, Universidad Peruana de Ciencias Aplicadas, Lima, 15023, Peru
Abstract

Prolonged sedentary behavior in young adults associated with excessive screen use causes biomechanical strain on the spine, contributing to cervical abnormalities.[1] Inertial Measurement Units (IMUs) offer a viable alternative for assessing this issue, as they are portable, low-cost, and highly sensitive to postural changes.[2] This study presents a two IMUs system designed to monitor cervical lordosis, quantify ranges of motion (ROM), and provide real-time postural biofeedback.

The system utilizes two nine-axis BNO085 IMUs, located at the first cervical vertebra (C1) and the seventh cervical vertebra (C7). An ESP32 microcontroller controls each IMU sensor via the Serial Peripheral Interface (SPI) at 50 Hz. However, a microprocessor handles inter-node communication using the ESP-NOW protocol; this unit is integrated at the C7 position and serves as the controller node. Data is transmitted via Wi-Fi to a remote server, enabling visualization and monitoring of angular changes, as well as configuring alerts and data export.

Preliminary tests confirmed the system's ability to quantitatively discriminate prolonged sedentary behavior from dynamic movement, demonstrating a range of motion variation in the cervical spine (∆ROM=11.79°) between sustained laptop sitting (ROM=10.44°) and walking (ROM=22.22°). These results substantiate the platform's feasibility for continuous ergonomic postural monitoring.

1.    Kuo, Y.-L., Huang, K.-Y., Kao, C.-Y., & Tsai, Y.-J. (2021). Journal of Environmental Research and Public Health, 18, 5430.

2.    Beange, K. H. E., Chan, A. D. C., & Graham, R. B. (2024). Journal of Biomechanics, 164, 111939.

Keywords
inertial measurement unit
spinal posture monitoring
quaternion-based sensor fusion
real-time biofeedback
Polydiacetylene-based Highly Efficient CT-Raman Cross-scale Imaging
Self-Assembled Bio–Metal Hybrid Film for SERS-Based Serum Metabolite Profiling and Gastric Cancer Diagnosis