The wearing comfort of hydrogel lenses is closely related to the change in water content that occurs over the course of wear, and resistance to dehydration has therefore been treated as a major criterion in the evaluation of hydrophilic lens materials. Betaine is an osmoprotectant reported to relieve hyperosmotic stress in corneal epithelial cells, and hydrogel lenses containing betaine were prepared to examine how the amount added affects their optical, surface, and mechanical properties. Betaine was dissolved directly into a mixture of HEMA, NVP, EGDMA, and AIBN by mild heating and sonication. Sample groups with different amounts of betaine, together with an additive-free control, were thermally polymerized into hydrogel lenses and hydrated in a buffered solution matched to the betaine concentration of each group to suppress leaching of the additive. Light transmittance in the ultraviolet and visible regions, refractive index, water content, contact angle, and tensile strength were then measured, and dehydration resistance was evaluated as the proportion of water retained relative to the initial water content in a chamber held at constant relative humidity with a saturated salt solution. As the amount of betaine increased, visible transmittance decreased while remaining at a high level across the spectrum, and the decrease in the ultraviolet region was larger than that in the visible region. Refractive index and water content increased, and dehydration resistance was also higher in groups containing more betaine. Contact angle decreased, indicating improved surface wettability, and tensile strength increased relative to the control. These results confirm that betaine simultaneously improves the water retention, surface wettability, and mechanical properties of hydrogel lenses, indicating its potential as a functional additive for hydrophilic lens materials.