Introduction:
Electroconductive hydrogels (ECH) are composites of electroactive and inherently conductive polymers within cross-linked, highly hydratable polymers. ECHs were rendered bioactive by direct conjugation with enzymes, biotin, antibody fragments, or aptamers. Formed from natural (e.g., chitosan) or synthetic [e.g., poly(HPMA)] hydrogels and conductive polymers such as polypyrroles or polythiophenes, their methods of synthesis, microform fabrication, and post-fabrication conditioning are presented and their use in bioelectronics, biosensors, and biochips presented.
Methods:
Bioactive ECH (BioECH) were formed by the direct electrophoretic inclusion of glucose oxidase and lactate oxidase within poly(HEMA-co-HPMA) hydrogels during oxidative or electro-polymerization. The compositional dependence of performance as scaffolds in tissue and regenerative engineering are explored via the study of viability and proliferation of various cell types (PC12, RMS13, HUVEC). BioECH constructs were prepared by 3-D printing, electrospinning, or spin coating and were fashioned onto micro disc electrode arrays or microfabricated interdigitated microsensor electrodes (IMEs) to produce amperometric or conductimetric biosensors.
Results and Discussion:
A Physiological Status Monitoring biochip allowed amperometric measurement of glucose and lactate as a function of enzyme inclusion and method of conjugation. A Wien oscillator allowed fused sensing of glucose and lactate using enzyme-chemiresistors when the oscillator’s input resistors changed according to the chemical potential of the analytes, glucose and lactate. The output of the system is a single sinusoidal wave from which the concentrations of glucose and lactate can be deconvoluted from the amplitude and DC offset, respectively. Hybrid electronic-ionic conductivity was found to influence cellular behavior.
Conclusions:
Bioactive electroconductive hydrogels may be made SMART (Sensing, Measuring, and Actively Responding Technical) and serve as hosting materials for a range of bioactives allowing the functional engineering ABIO-BIO interface in biosensors, bioelectronics, and biochips. Small changes in composition confer dramatic changes in properties such as hydration, bound:free water ratio, and electrical conductivity.