EventsThe 2nd International Conference on Bioengineering
Published
This submission belongs to the session S4. Biomedical Engineering and Biomaterials of the event The 2nd International Conference on Bioengineering
Published date
16 Nov, 2026
Citation
Isabel Cristina Agreda Sobrino, Sergio Salas, Carmen Mayorga, Automated Optical Detection Station for Residual Protein Contamination on Metallic Reusable Surgical Instruments, in Proceedings of The 2nd International Conference on Bioengineering, Barcelona, 10 November–13 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Automated Optical Detection Station for Residual Protein Contamination on Metallic Reusable Surgical Instruments

Sergio Salas 1
Carmen Mayorga 1
1. School of Biomedical Engineering, UPC-Peruvian University of Applied Science, Lima, 15023
Abstract

Introduction: Residual protein contamination on reusable surgical instruments remains a significant patient safety risk in central sterile supply departments. Inadequate cleaning of it undermines sterilization itself: residual organic material can shield microorganisms from the sterilizing agent, becoming a document contributing cause of healthcare-associated infections (HAIs). The WHO Global Action Plan on infection prevention and control (2024-2030) targets HAI-free care by 2030, calling for new technologies to strengthen and objectify prevention practices. Yet cleaning verification, the checkpoint before sterilization, still relies on subjective visual inspection, unvalidated on metallic surfaces. This study addresses that gap with an automated OPA fluorescence detection system integrated with semantic segmentation.

Methods: The station integrates a UV-A excitation source, a motorized rotating platform, an atomizer and a peristaltic pump for reagent application, and image acquisition via raspberry pi HQ camera. An esp32 microcontroller coordinates home calibration, synchronized reagent dispensing a controlled 120s OPA reaction interval, UV-A activation and triggered image capture. Captured are processed using u-nets architecture with MobileNetV2 encoder pre-trained via transfer learning, balancing accuracy and efficiency for embedded deployment.

Results and discussion: Automated control system was implemented and verified with rotation, reagent dispensing, timing and image capture subsystems operating in the designed sequence, eliminating operator dependent variability inherent to manual inspection. An initial image dataset of surgical blade instruments has been collected to support segmentation model development with the U-net architecture selected to enable automated identification of contamination regions beyond manual assessment. The system's biochemical detection stage is currently advancing through validation testing.

Conclusions: This work demonstrates the feasibility of an automated, low-cost optical station combining OPA fluorescence with U-net segmentation, advancing pre-sterilization cleaning verification towards quantitative, AI assisted standards.

Keywords
Infection prevention and control
Healthcare-associated infections (HAIs)
Medical device reprocessing
Surgical instrument sterilization
Cleaning verification
Optical fluorescence detection
o-Phthalaldehyde (OPA)
UV-A excitation
Deep learning
Seman
Optimisation of Secondary Metabolite Production in Melissa officinalis L. through Methyl Jasmonate, Salicylic Acid, and Chitosan Elicitation
Intraoperative hyperspectral imaging and deep learning for vulvar cancer detection