Wearable electrochemical biosensors offer a promising strategy for the continuous monitoring of disease-associated biomarkers in peripheral body fluids; nevertheless, their successful implementation requires scalable and high-performance electrode materials. Laser-induced graphene (LIG) has emerged as an attractive material due to its low-cost fabrication, compatibility with roll-to-roll manufacturing, and ability to utilize biomass-derived precursors. This work investigates the Peruvian potato variety Negra Andina as a sustainable precursor for LIG production.
The suitability of Negra Andina potato peel as a precursor was first evaluated by quantifying its total phenolic content (TPC) using the Folin–Ciocalteu assay. The variety exhibited a 1.72-fold higher TPC than the control potato (1490.98 vs. 865.38 mg GAE/100 g), supporting its potential as a carbon-rich precursor for laser-induced graphitization. Following CO₂ laser pyrolysis, Raman spectroscopy revealed the characteristic D, G, and 2D bands, indicating the formation of defective multilayer graphene. Although structurally defective, these graphitic domains are expected to be advantageous for electrochemical sensing because defect-rich graphene has been associated with increased electroactive surface area. SEM analysis further showed a porous, interconnected three-dimensional carbon network with high surface area, a morphology that is considered to have the potential to promote analyte diffusion and enhance electrode performance.
These findings demonstrate the feasibility of using Negra Andina potato peel as a sustainable precursor for laser-induced graphene. Ongoing work focuses on optimizing laser processing parameters such as laser power, scan speed, DPI, number of passes and defocus distance using a Random Forest-based active learning framework to improve electrical conductivity and support the future development of wearable electrochemical biosensors.