Marine vehicle propellers are traditionally manufactured from metal, plastic, or composite materials. Recently, the use of additively manufactured polymer propellers for marine vehicles has been growing due to their advantages of rapid prototyping and low-cost fabrication. However, their limited stiffness and surface roughness can affect the hydroelastic response and longevity of the propellers. This study offers a coupled Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) methodology based on open- water simulation to enhance the structural efficiency of a 3D-printed polylactic acid (PLA) propeller, produced via Fused Filament Fabrication (FFF) method, by reinforcing it with carbon-epoxy surface coatings. In this proposed framework, unidirectional Fluid-Structure Interaction (FSI) simulations using Computational Fluid Dynamics (CFD) coupled with structural analysis are conducted on a propeller model. A model of the KP-505 propeller with a 250 mm diameter has been created using Computer-Aided Design software to conduct the simulations. This study expects to demonstrate that reinforced PLA propellers offer significant advantages with reduced stress and hydroelastic deformation compared to the uncoated PLA propeller. The work aims to provide a pathway towards the low-cost, efficient design of lightweight, high-performance marine propellers and to establish the potential for enhanced structural performance offered by reinforced additive-manufactured underwater vehicle propulsion.