Submarine detection is affected by high-frequency acoustic scattering, which depend on the acoustic environment. In this study, the sensitivity of submarine acoustic scattering to ocean sound-speed conditions is examined numerically. A three-dimensional model was created using COMSOL Multiphysics® and the Pressure Acoustics, Frequency Domain interface. Six marine environments the Baltic Sea, Black Sea, North Pacific Ocean, Mediterranean Sea, Bay of Bengal, and Red Sea—were represented by sound speeds of 1465, 1480, 1500, 1525, 1540, and 1550 m/s. The geometry of the submarine, the excitation frequency (2 kHz), the source amplitude and setup, depth of the computational domain (100 m), and the boundary conditions were kept same. For the Black Sea, the wavelength is 0.74 m and the acoustic size parameter (kL) is 526.43 for the 62 m long submarine, shows that it is an acoustically large scattering regime. The acoustic responses were assessed in terms of acoustic pressure distribution, bistatic target strength (BiTS), and scattered sound-pressure level (SPL). The main scattering characteristics were found to be concentrated close to the bow, the sail, and the stern. The maximum BiTS was 31 to 32 dB at a receiver angle of 2.6 rad, and the variations in sound speed affected the angular distribution and the magnitude of the scattering. The Red Sea gave the highest scattered pressure magnitude (about ±3.5 × 10⁻³ Pa) and SPL (~70 dB), whereas the Baltic Sea achieved ±2.0 × 10⁻³ Pa and 60 dB. In the other cases the responses were similar. Variations in sound speed influence the scattering intensity and the interference patterns, while the spatial features remain dependent on geometry. However, the present study only considers a uniform sound speed; more work is needed to consider realistic depth-dependent sound speed, temperature, salinity, density, attenuation, and seabed.