EventsThe 2nd International Online Conference on Marine Science and Engineering
Published
This submission belongs to the session S1. Ocean Engineering of the event The 2nd International Online Conference on Marine Science and Engineering
Published date
18 Nov, 2026
Academic Editor
author-avatarWeicheng Cui
Contribution&Funding
Conceptualization,
[Helal Uddin]
Methodology,
[Helal Uddin]
Software,
[Helal Uddin]
Validation,
[Helal Uddin]
Formal analysis,
[Helal Uddin]
Investigation,
[Helal Uddin]
Resources,
[Helal Uddin] ; [Jihad Antor]
Data curation,
[Helal Uddin]
Writing - original draft,
[Helal Uddin] ; [Jihad Antor]
Writing - review,
[editing] ; [Helal Uddin]
Visualization,
[Helal Uddin]
Supervision,
[Helal Uddin]
Project administration,
[Jihad Antor] ; [Fardin Khan] ; [Juliana Vinagre Lisboa]
Funding acquisition,
[Jihad Antor] ; [Fardin Khan] ; [Juliana Vinagre Lisboa]
Funding: --
Citation
Helal Uddin, Jihad Antor, Fardin Khan, Juliana Vinagre Lisboa, Mechanical Engineering Design Innovations for Sustainable Marine Plastic Waste Collection and Ocean Pollution Control, in Proceedings of The 2nd International Online Conference on Marine Science and Engineering, 23 November–25 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Mechanical Engineering Design Innovations for Sustainable Marine Plastic Waste Collection and Ocean Pollution Control

image
Juliana Vinagre Lisboa 2
1. Mechanical Engineering, Hajee Mohammad Danesh Science and Technology University, Dinajpur, 5200, Bangladesh
2. Mechanical Engineering , SENAI CIMATEC University, Salvador, Brazil
Abstract

Marine plastic waste continues to be a significant problem in marine environments; millions of tons of plastic waste enter the seas year after year, accumulating in marine garbage patches and along coastlines. The current mechanical collection methods may suffer from plastic collection restrictions, energy consumption, operational adaptability, and incidental collection of marine organisms. The focus of this study is on mechanical engineering design innovations that enhance the collection of floating marine plastic debris and contribute to ocean pollution control that allows for sustainability. A mechanical collection and retention system was designed and tested to adhere to a catamaran platform; the design was tested via computational fluid dynamics simulation and experiments in a water tank and was later tested in open water. The effects of these key design variables, such as screen depth, size of screen mesh, arrangement of the propulsion, and the layout of the compartments (rejection areas) for detailed retention, were systematically evaluated. The optimized system values for plastic retention efficiency were 68% - 85% under the investigated test configurations. The optimized arrangement decreased the energy consumption per kg of collected plastic by 42% - 60% when compared with the tested fixed-aperture control configurations. The maximum collection rate achieved with one unit was up to 120 kg of solids per day, or around 3.6 tonnes per month, with continuous operation for 30 days. Theoretically, a fleet of 10 units could collect 36 tonnes monthly, although maintenance and field conditions may affect performance rates. Only floating plastic debris was assessed, and there was no quantitative assessment related to microplastic recovery efficiency. The incidental biological material recovered was less than 5% under all the conditions examined. Results indicate better energy efficiency and mechanical retention under static conditions, and further tests under dynamic sea states are desired. 

Keywords
Marine plastic waste collection
Ocean pollution control
Mechanical engineering design
Autonomous surface vehicles
Plastic retention efficiency
Sustainable cleanup systems
Numerical Investigation of High-Frequency Acoustic Scattering from a Submarine under Different Ocean Environmental Conditions 
Numerical Investigation of a Vertical-Axis Wind Turbine for Marine Applications