EventsThe 2nd International Online Conference on Marine Science and Engineering
Published
This submission belongs to the session S1. Ocean Engineering of the event The 2nd International Online Conference on Marine Science and Engineering
Published date
18 Nov, 2026
Academic Editor
author-avatarWeicheng Cui
Contribution&Funding
Conceptualization,
[Aysel Elshenawy]
Methodology,
[Aysel Elshenawy]
Software,
[Aysel Elshenawy]
Validation,
[Aysel Elshenawy]
Formal analysis,
[Aysel Elshenawy]
Investigation,
[Aysel Elshenawy]
Resources,
[Aysel Elshenawy]
Data curation,
[Aysel Elshenawy]
Writing - original draft,
[Aysel Elshenawy]
Writing - review,
[editing] ; [Aysel Elshenawy]
Visualization,
[Aysel Elshenawy]
Supervision,
[Aysel Elshenawy]
Project administration,
[Aysel Elshenawy]
Funding acquisition,
[Aysel Elshenawy]
Funding: --
Citation
Aysel Elshenawy, Dual-Objective Control of Thermoelectric Waste-Heat Recovery in Marine Raw-Water Cooling Circuits, in Proceedings of The 2nd International Online Conference on Marine Science and Engineering, 23 November–25 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Dual-Objective Control of Thermoelectric Waste-Heat Recovery in Marine Raw-Water Cooling Circuits

1. Electrical Engineering & Computer Science, Florida Atlantic University, Boca Raton, 33428, USA
Abstract

Marine vessels using raw-water cooling discharge heated seawater directly overboard, elevating local water temperature and depressing dissolved oxygen in marinas, mooring fields, and other confined coastal waters, while simultaneously rejecting roughly one fifth of engine fuel energy. Thermoelectric generators mounted on the discharge line can intercept this stream, but existing approaches treat the array purely as an electrical source and control it by maximum power point tracking.

This work indicates that such control is structurally incomplete. Because current flowing through a thermoelectric module transports heat by the Peltier effect, the operating current maximizing heat extraction is distinct from the current maximizing electrical output, their ratio being 2Th / (Th − Tc). For a six-module bismuth-telluride array characterized here, the two differ by a factor of 15.2, and a continuous trade-off range exists between the maximum power point and the short-circuit condition.

Bench testing on a simulated raw-water circuit reduced discharge temperature by 7.33 ± 1.17 °C across fifteen trials (paired t-test, p < 0.001) while removing 512 ± 84 W of heat. Analysis shows that the diode-coupled prototype delivered 0.106 W against 1.28 W available at its maximum power point, approximately one twelfth, while providing no means whatever to influence discharge temperature.

A dual-objective control formulation is therefore proposed, in which a controller forms an electrical power metric and a thermal extraction metric from measured quantities, determines a weighting parameter from vessel state including energy storage charge, discharge temperature excess over ambient water, and position within designated sensitive waters, and adjusts a power-conditioning operating point to extremize a combined objective function. A first-order model projects 62 W to 3.1 kW of recoverable electrical power and 1.6 to 4.2 °C of discharge cooling across four vessel classes from a 15 kW outboard to a 750 kW workboat.

Keywords
thermoelectric generator
marine waste heat recovery
thermal discharge mitigation
raw-water cooling
maximum power point tracking
Peltier effect
Numerical Investigation of a Vertical-Axis Wind Turbine for Marine Applications
Historical Wind and Wave Dynamics in the Makassar Strait along ALKI 2: A 39-Year Assessment Using ERA-Interim Data