Estuarine systems are important transport pathways for land-based plastics entering the marine environment, where microplastics (≤5 mm) present ecological risks through ingestion, contaminant transport, and trophic transfer. Autonomous Surface Vessels (ASVs) provide a potential platform for targeted recovery, but their hydrodynamic design must simultaneously limit resistance and promote particle transport toward the collection region. This study presents a fully numerical design and hydrodynamic assessment of a microplastic-harvesting catamaran ASV for shallow estuarine operation. Unsteady Reynolds-Averaged Navier–Stokes simulations coupled with the Volume of Fluid method were employed to resolve viscous free-surface flow, with turbulence represented using the k-ω SST model. A three-level spatial verification study was additionally conducted to assess mesh sensitivity of the predicted hydrodynamic resistance. Lagrangian particle tracking was implemented for spherical low-density microplastic surrogates ranging from 0.5 to 5 mm, incorporating drag, gravity and free-surface-interface effects. Particle capture was defined numerically by directional crossing of a prescribed collection plane representing the intake region. The simulations identify demi-hull spacing S/L=0.25as the selected configuration and demonstrate the importance of catamaran wave-interference and near-intake flow structures in determining resistance and particle transport. The particle calculations further establish a reproducible framework for size-resolved evaluation of collection performance. Limitations associated with spherical particle representation and omission of explicit lift, virtual-mass and non-spherical shape corrections are identified for subsequent sensitivity analysis. The resulting framework provides a numerically verified basis for integrating hydrodynamic efficiency and microplastic-recovery performance in the development of autonomous estuarine-cleaning vessels.