EventsThe 2nd International Online Conference on Marine Science and Engineering
Published
This submission belongs to the session S1. Ocean Engineering of the event The 2nd International Online Conference on Marine Science and Engineering
Published date
18 Nov, 2026
Academic Editor
author-avatarWeicheng Cui
Citation
Dovydas Lizdenis, Gintautas Dzemyda, Aistis Raudys, Tomas Eglynas, Sergej Jakovlev, VIBRATION DATA-QUALITY ASSESSMENT FOR REFRIGERATED SHIPPING CONTAINERS IN MARITIME COLD-CHAIN OPERATIONS, in Proceedings of The 2nd International Online Conference on Marine Science and Engineering, 23 November–25 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

VIBRATION DATA-QUALITY ASSESSMENT FOR REFRIGERATED SHIPPING CONTAINERS IN MARITIME COLD-CHAIN OPERATIONS

Dovydas Lizdenis 1,2
image
1. Marine Research Institute, Klaipeda University, Universiteto al. 17, Klaipeda, Lithuania
2. UAB Inotecha, Danės g. 47a, Klaipeda, Lithuania
3. Institute of Data Science and Digital Technologies, Vilnius University, Akademijos st. 4, Vilnius, Lithuania
4. Department of Computer Science, Faculty of Mathematics and Informatics, Vilniaus University, Didlaukio g. 47, Vilnius, Lithuania
Abstract

Introduction

Refrigerated shipping containers, or reefer containers, are essential for maritime cold-chain logistics, yet their onboard freezer units are exposed to continuous mechanical loading from compressors, fans, road handling, port operations, and vessel motion. Vibration monitoring could support condition-based maintenance, but its reliability depends on separating genuine equipment signatures from measurement-chain artefacts.

Methods

A pilot vibration-monitoring study was performed on refrigerated container/freezer equipment using multi-axis acceleration logging. Time-domain acceleration traces and frequency-domain spectra were reviewed to identify axis-dependent behaviour, harmonic components, and possible logger-side filtering. The analysis focused on whether the recorded data were suitable for subsequent diagnostics of mechanical condition and transport-induced loading.

Results

The data showed that measurement quality is a limiting factor for applying vibration diagnostics in reefer-container operations. In the SSX-series logger records, the X-axis spectrum was contaminated by a persistent 3 Hz component and harmonics at 6 Hz, 9 Hz, and higher multiples. Additional evidence of filtering was observed across the SSX records, suggesting either internal preprocessing or a logger malfunction. Consequently, these data cannot be used directly for mechanical diagnostics without independent validation, recalibration, or artefact-removal procedures. The study nevertheless demonstrates that spectral screening can rapidly detect unsuitable data before false conclusions about faults are drawn.

Conclusions

Beyond the immediate diagnostic findings, this study addresses a wider infrastructure-access gap: academic researchers rarely obtain direct measurement access to operating refrigerated containers and standardised freezer units used in commercial logistics. By generating field data from real assets, the research can enrich the engineering community with reference datasets, validation procedures, and practical evidence of failure modes. It can also support companies in developing more reliable predictive-maintenance systems for already-deployed standardised freezer units, reducing false alarms and improving cold-chain reliability.

Keywords
Refrigerated shipping containers
reefer containers
freezer units
vibration monitoring
spectral analysis
data quality
predictive maintenance
maritime cold chain.
Turbulent Wind Analyses of Eight Floating Wind Turbines
An Enhanced Physics-Guided Machine Learning Model for Estimating Ship Fuel Consumption from AIS Data