The increasing size of ultra-large container ships (ULCS) has substantially increased above-deck windage areas, making aerodynamic resistance an increasingly important contributor to total ship resistance, fuel consumption, and greenhouse gas emissions. Consequently, improving the aerodynamic efficiency of exposed superstructures is becoming increasingly relevant to the maritime industry's decarbonisation objectives. Previous studies have investigated aerodynamic drag reduction through container-stack optimisation, bow fairings, windshields, and superstructure-mounted flow-control devices. Although promising drag reductions have been reported, many proposed solutions involve complex structural modifications or have been evaluated primarily under headwind conditions, providing limited insight into performance under oblique winds. Inspired by sport aerodynamics engineering, this study presents a computational fluid dynamics (CFD) investigation of novel appendage geometries positioned within the accommodation block region of a ULCS. Unlike previous headwind-focused studies, the aerodynamic performance of the proposed flow-control concepts is evaluated over a range of wind angles in order to investigate their sensitivity to changing wind direction. The results demonstrate that pressure drag dominates aerodynamic resistance and increases substantially with wind angle due to bluff-body flow separation and wake development. The effectiveness of the proposed appendage concepts was found to vary with angle of attack, indicating sensitivity to changing wind conditions. The findings highlight the influence of appendage geometry on flow separation, wake behaviour, and aerodynamic drag reduction across different wind conditions. These findings demonstrate the potential of practical, retrofittable localised flow-control appendages to reduce ULCS wind resistance, supporting lower fuel consumption and greenhouse gas emissions.