When a granular material undergoes localized deformation at its base, stress can be transferred to the surrounding material, allowing the overlying material to remain partially supported. This phenomenon, known as the arching effect, has traditionally been investigated using trapdoor tests. Previous studies have suggested that stress redistribution occurs before significant displacement develops. However, the small-scale settlement process, which may be important for understanding arch formation, has not been sufficiently investigated.
In this study, a small-scale trapdoor testing apparatus was developed to investigate the initiation and development of the arching effect. X-ray computed tomography (CT) scanning was conducted at successive stages of settlement to visualize internal displacement, strain, and density changes. The CT results showed a band-shaped region of reduced density as the trapdoor was lowered. In addition, a finite element method (FEM) analysis based on the experimental model was conducted to estimate the stress distribution during settlement. The FEM results showed that the directions of the principal stresses changed to form arch-shaped paths. However, these paths did not form when the arch was too shallow. By combining CT observations and FEM analysis, this study aims to improve the understanding of stress redistribution and the development of the arching effect during small-scale settlement.