EventsOHOW 2026 – The 5th International Symposium on One Health, One World
Published
This submission belongs to the session Infrastructure Management and Sustainable built Environment (IMSBE) of the event OHOW 2026 – The 5th International Symposium on One Health, One World
Published date
18 Nov, 2026
Contribution&Funding
Conceptualization,
[Muneeb Ashraf] ; [Tsukasa Mizutani]
Methodology,
[Muneeb Ashraf] ; [Tsukasa Mizutani]
Software,
[Muneeb Ashraf]
Validation,
[Muneeb Ashraf]
Formal analysis,
[Muneeb Ashraf]
Investigation,
[Muneeb Ashraf]
Resources,
[Tsukasa Mizutani]
Data curation,
[Muneeb Ashraf]
Writing - original draft,
[Muneeb Ashraf]
Writing - review,
[editing] ; [Tsukasa Mizutani]
Visualization,
[Muneeb Ashraf]
Supervision,
[Tsukasa Mizutani]
Project administration,
[Tsukasa Mizutani]
Funding acquisition,
[Tsukasa Mizutani]
Funding: --
Citation
Muneeb Ashraf, Tsukasa Mizutani, Surface and Subsurface Data Integration for Reinforced Concrete using Mobile LiDAR and GPR, in Proceedings of OHOW 2026 – The 5th International Symposium on One Health, One World, Hanoi, 26 November–28 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Surface and Subsurface Data Integration for Reinforced Concrete using Mobile LiDAR and GPR

Muneeb Ashraf 1
1. Institute of Industrial Science, The University of Tokyo, Tokyo, 153-8505, Japan
Abstract

Aging infrastructure is a global issue faced by both developed and developing countries. It has resulted in several incidents worldwide, such as the Sasago Tunnel ceiling collapse in Japan (2012) and the Morandi Bridge collapse in Italy (2018), which caused casualties and significant financial loss. Such incidents highlight the need for cost-effective and compact inspection technologies that cover both the surface and subsurface conditions of infrastructure. However, surface and subsurface inspections are usually carried out separately, and their results are rarely integrated into a single model. This research focuses on the fusion of smartphone LiDAR and handheld Ground Penetrating Radar (GPR) data to create an integrated surface and subsurface information map of reinforced concrete. Four reinforced concrete specimens with varying cover thicknesses and rebar diameters were used. Smartphone LiDAR was used to collect the surface geometry of the specimens, and Random Sample Consensus (RANSAC) was applied to identify the specimen planes and define a local coordinate system. Handheld GPR data was then collected along multiple scan lines and processed using the automated cover thickness and relative permittivity estimation algorithm previously developed in our laboratory. The algorithm provided the location and cover thickness of the rebars and the relative permittivity of the concrete, which can indicate internal moisture condition and the presence of voids. The GPR scan lines were transformed into the LiDAR coordinate system, and both datasets were fused into a 3D transparent visualization of the specimens. The fused model visualized the external geometry of the specimens together with the location and cover thickness of the internal rebars. This approach is currently being extended to real-world infrastructure, where it will enable combined surface and subsurface condition assessment. It will also provide a single interpretable model that helps link surface and subsurface deterioration.

Keywords
LiDAR
Ground Penetrating Radar (GPR)
Sensor Data Fusion
Infrastructure Inspection
Non-Destructive Testing (NDT)
Reinforced Concrete
3D Visualization
Combining NISAR Backscatter Changes and Prompt-Guided SAM Segmentation for Flood Mapping in Noto, Japan
A Conceptual Model of Satellite-Intelligence Platform for Risk Management System On Oil Palm Plantation and Tropical Peatland Environments