EventsOHOW 2026 – The 5th International Symposium on One Health, One World
Published
This submission belongs to the session Special of the event OHOW 2026 – The 5th International Symposium on One Health, One World
Published date
18 Nov, 2026
Contribution&Funding
Conceptualization,
[HIROMITSU HACHIYA]
Methodology,
[DIEP HUU NGUYEN] ; [HIROMITSU HACHIYA]
Validation,
[DIEP HUU NGUYEN] ; [HIROMITSU HACHIYA]
Formal analysis,
[DIEP HUU NGUYEN]
Investigation,
[HIROMITSU HACHIYA]
Resources,
[DIEP HUU NGUYEN] ; [HIROMITSU HACHIYA]
Data curation,
[DIEP HUU NGUYEN] ; [HIROMITSU HACHIYA]
Writing - original draft,
[DIEP HUU NGUYEN] ; [HIROMITSU HACHIYA]
Writing - review,
[editing] ; [DIEP HUU NGUYEN] ; [HIROMITSU HACHIYA]
Visualization,
[DIEP HUU NGUYEN]
Supervision,
[HIROMITSU HACHIYA]
Funding: --
Citation
DIEP HUU NGUYEN, HIROMITSU HACHIYA, Development of Screen-Printed Disposable 3-in-1 Electrodes for On-Site Heavy Metals Analyzers, in Proceedings of OHOW 2026 – The 5th International Symposium on One Health, One World, Hanoi, 26 November–28 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Development of Screen-Printed Disposable 3-in-1 Electrodes for On-Site Heavy Metals Analyzers

1. Development & Technology Division, DKK-TOA CORPORATION, 613, Kita-Iriso, Sayama-shi, Saitama, 350-1388, Japan
Abstract

Electrochemical detection methods are widely used in on-site analyses of Pb2+ and Cd2+ in water samples, because optical methods lack sufficient sensitivity. Although mercury-based electrodes exhibiting excellent electrochemical properties, they have been gradually replaced by other materials due to high toxicity of mercury. We investigated carbon electrode materials for Pb/Cd measurements and demonstrated that they provide sufficient sensitivity for practical applications.

In this study, we have been developing the on-site heavy metals analyzer using low-cost screen-printed carbon electrodes. Feasibility study on the application of developed electrodes for Vietnam’s surface waters measurement has been conducted. Sensitive and affordable heavy metal detection methods based on stripping voltammetry with Hg-free electrodes were developed. Screen printed 3-in-1 electrode chip with carbon working electrodes were applied to droplets measurement for on-site heavy metals detection.

The excellent linear response curves for droplets of 100-1000 µg/L Pb2+ were observed. 100-500 µg/L Pb2+/Cd2+ co-existing solutions in 0.1 mol/L HNO3 indicated good responses after pH-adjusting with 0.2 mol/L CH3COONa. The presence of co-existing substances did not significantly affect the electrode performance.

Although the concentrations of Pb2+ and Cd2+ in several surface waters could not be quantified due to very low concentrations, the quantification of these two heavy metals will be able to be achieved by using a pre-concentration step with the aid of microfluidic device allowing to increase their concentrations prior to the quantification by low-cost electrodes. The current work demonstrates high potential of low-cost electrodes applied for surface water quality measurement. 

Keywords
stripping voltammetry
Hg-free
on-site detection
heavy metal
Pb
Cd
A microphysiological human blood vessel model reveals drug-induced changes in the release of cancer cells into the circulation
An Uncertainty-Aware Framework for Underground Cavity Detection and Segmentation in Real-World 3D GPR Images Using  Ensemble Learning