Heavy metal pollution in environmental water is a serious problem in developing countries and poses serious risks to public health. Therefore, efficient analytical methods are urgently needed. Conventional laboratory-based techniques, such as AAS (atomic absorption spectrometry), are sensitive and accurate analytical methods. However, because of their large size and high cost, laboratory-based methods cannot meet high analytical demands. On-site and low-cost analytical methods are desired. Electrochemical(stripping voltammetry– SV) detection method is one of the portable and low-cost detection methods for heavy metals and is suitable for on-site analysis. Screen-printed electrodes can provide a cost-effective detection platform. However, the SV detection method cannot meet the requirement for ppb-level detection. In addition, environmental samples contain many impurities, which affect the accuracy of the SV detection. Therefore, a pretreatment device is required for SV detection in environmental water analysis. In this study, a microfluidic pretreatment device is proposed as an on-site pretreatment device targeting small-volume pretreatment. In order to improve the detection limit of the SV detection, a 1 mL sample volume is converted to 20 mL (one drop) by solid-phase extraction with chelating particles, which allows a ~50 times concentration. The small volume of 20 mL also reduces cost by reducing the amount of the expensive chelating particles. This procedure can convert environmental water with many impurities into a clean and ideal solution for SV detection. This study reports the basic microfluidic platform for this pretreatment procedure, utilizing Pb2+ ions as a standard solution.