The East China Sea Shelf Basin is a back-arc extensional Basin shaped by long-lived subduction, where deep faults, magmatic-hydrothermal activity, and thick Paleogene successions provide a favorable setting for evaluating natural hydrogen generation and preservation offshore China. Using conventional petroleum data, we developed a natural hydrogen screening framework that integrates potential generation processes, migration pathways, reservoir conditions, and preservation controls. Three potential H2-generation pathways were evaluated. The first is hydrothermal alteration of deeply buried granitic rocks at depths greater than 4,000 m and temperatures of 130–200 °C. The second is water radiolysis associated with U–Th-enriched basement, saline formation waters, and fault-controlled circulation. The third is thermal degradation of highly mature to overmature organic matter in thick source rocks with Rₒ values greater than 2.0% and temperatures above 200 °C.
Seal quality is strongest in the Pinghu slope belt of the Xihu Sag. On the western slope, Pinghu Formation mudstones constitute 50–72% of the succession. Cumulative drilled mudstone thickness commonly exceeds 400 m and reaches 957.5 m. Individual mudstone beds are mostly 10–50 m thick. Mudstone porosity is generally <6%, permeability reaches 10-8–10-6 μm2, and displacement pressure reaches 14 MPa. In the Lishui-Jiaojiang Sag, upper Lingfeng mudstones are 100–600 m thick, Mingyuefeng sandstone in the LSX structure is overlain by approximately 300 m of mudstone, and a mudstone interval exceeding 200 m occurs at 2170–2385 m in the Jiaojiang target interval.
Three screening layers are proposed: Layer 1 areas combine hydrogen-source indicators, deep-fault conduits, and high-quality mudstone seals. Layer 2 areas require validation of pressure–temperature coupling, fluid connectivity, and seal effectiveness. Layer 3 areas are inferred from basement, magnetic, or structural indicators. Because H2 is highly mobile and diffusive, faults are double edged: conduit or leakage pathway, controlled mainly by single-bed mudstone thickness and mudstone content. Thus caprock integrity, permeability, lateral continuity, and fault-seal architecture must precede quantitative resource assessment.