EventsThe 2nd International Online Conference on Marine Science and Engineering
Published
This submission belongs to the session S5. Marine Environmental Science and Pollution of the event The 2nd International Online Conference on Marine Science and Engineering
Published date
18 Nov, 2026
Academic Editor
author-avatarGiuseppe Suaria
Contribution&Funding
Conceptualization,
[Helal Uddin]
Methodology,
[Helal Uddin]
Software,
[Helal Uddin]
Validation,
[Helal Uddin] ; [Jihad Antor]
Formal analysis,
[Helal Uddin] ; [Jihad Antor]
Investigation,
[Jihad Antor] ; [Helal Uddin]
Resources,
[Jihad Antor]
Data curation,
[Helal Uddin] ; [Jihad Antor]
Writing - original draft,
[Helal Uddin] ; [Jihad Antor]
Writing - review,
[editing] ; [Helal Uddin] ; [fardin khan] ; [Jihad Antor]
Visualization,
[Helal Uddin] ; [Jihad Antor]
Supervision,
[Jihad Antor] ; [Helal Uddin]
Project administration,
[Jihad Antor] ; [fardin khan] ; [juliana viagra lisboa]
Funding acquisition,
[fardin khan] ; [juliana viagra lisboa]
Funding: --
Citation
Helal Uddin, Jihad Antor, fardin khan, juliana viagra lisboa, Advanced Mechanical Engineering Technologies for Sustainable Marine Waste Management: Toward a Circular Blue Economy (CBE) , in Proceedings of The 2nd International Online Conference on Marine Science and Engineering, 23 November–25 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Advanced Mechanical Engineering Technologies for Sustainable Marine Waste Management: Toward a Circular Blue Economy (CBE) 

image
juliana viagra lisboa 2
1. Mechanical Engineering, Hajee Mohammad Danesh Science and Technology University, Dinajpur, 5200, Bangladesh
2. Mechanical Engineering, SENAI CIMATEC University, Salvador, Brazil
Abstract

Marine pollution is a problem for ecosystems, biodiversity, coastal economies and sustainable ocean development. While mechanical engineering technologies are increasing at an advanced level in waste collection, recycling and resource recovery, existing systems experience reduced collection efficiencies, inefficient energy use, low levels of automation, and difficulties relating to structural integrity and reliability. There is a need for an integrated engineering approach to reach a sustainable circular blue economy. This study aims to design, analyze and validate an advanced mechanical engineering system for sustainable marine waste management. An outcome is to create efficient waste collection, minimizing energy use, reliable structures, and systematic engineering optimisation for circular use of resources. The system designed was simulated in SolidWorks, analyzed using the software ANSYS Fluent (CFD), and also analyzed using the software ANSYS Mechanical (FEA). The performance parameters measured were collection efficiency (η), flow velocity (V), pressure drop (ΔP), equivalent stress (σ), total deformation (δ), power consumption (P) and factor of safety (FOS). A numerical model has been validated with laboratory tank tests. The optimized system improved the collection efficiency of 81.4%, leading to a reduction in energy consumption by 47.6% compared to the baseline and a 38 % improvement in the overall operational performance. The maximum equivalent stress, maximum deformation and factor of safety were 42.7 MPa, 1.83 mm and 3.15, respectively. The validation revealed good agreement between numerical result and experimental result with an average of absolute errors 4.8 %. Mechanical engineering system enhances targetedly the efficiency, reliability and sustainability of marine waste management. The proposed technology allows an effective recovery of waste, recycling of resources and moving towards a circular blue economy and offers a platform for future smart systems of marine protection environment.

Keywords
Marine waste management
Mechanical engineering technologies
Circular blue economy
Sustainable ocean systems
Resource recovery
Empirical scaling of oil slick area to spilled mass in marine oil spills
Microplastic contamination in key marine species of the Black Sea