EventsThe 2nd International Online Conference on Marine Science and Engineering
Published
This submission belongs to the session S5. Marine Environmental Science and Pollution of the event The 2nd International Online Conference on Marine Science and Engineering
Published date
18 Nov, 2026
Academic Editor
author-avatarChun-Feng Li
Citation
Nwaorgu Godspower, Anthony LongJohn, Electrochemical Characterization of API 5L X42 and X65 Pipeline Steels in Marine Environment, in Proceedings of The 2nd International Online Conference on Marine Science and Engineering, 23 November–25 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Electrochemical Characterization of API 5L X42 and X65 Pipeline Steels in Marine Environment

1. Marine Engineering Department, Nigeria Maritime University, Okerenkoko, Warri South, 332104, Nigeria
Abstract

The high corrosion resistance of marine pipeline steels is used for the effective transportation of crude products when exposed to the marine environment. However, these pipelines lose their resistance, integrity, and service life. This study comparatively analyses the corrosion behaviour of API 5L X42 and API 5L X65 steel pipelines in seawater using electrochemical studies to serve as a basis for material selection in coastal and offshore applications. The corrosion behaviour was researched using open-circuit potential (OCP), linear polarization resistance (LPR), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS). The PDP analysis showed that the two steels are significantly different. API 5L X42 has a corrosion potential (Ecorr) of -0.096 V with a corrosion current density (Jcorr) of 7.93 × 10-4 Acm-2.  API 5L X65 has a corrosion potential of -0.134V and Jcorr of 2.61 × 10-4 Acm-2. The corrosion rate for X65 decreased by 9.21mm year-1, and for X42 it decreased by 3.03 mm year-1, showing a 67% reduction. X42 corroded about 3.04 times more than X65. The anodic Tafel slopes X42 and X65 were 291.50 and 291.55 mV dec-1, respectively, while the cathodic slopes were 281.15 and 295.67 55 mV dec-1. The EIS measurement showed that X42, and X65 have larger impedance semicircle and indicates better resistance to interfacial charge transfer and corrosion. The electrochemical outcome shown by API 5L X65 displays better corrosion resistance than API 5L X42 in seawater, and X65 will be better suited for pipeline application in a marine environment.

Keywords
Corrosion
seawater
pipeline steel
electrochemical techniques
marine corrosion
Application of a Handheld Gaussmeter for Mapping the Magnetic Properties of Beach Sands: A Case Study from the Polish Baltic Sea Coast
360 technology applied to marine training