EventsThe 2nd International Online Conference on Marine Science and Engineering
Published
This submission belongs to the session S4. Marine Biology and Aquaculture of the event The 2nd International Online Conference on Marine Science and Engineering
Published date
18 Nov, 2026
Academic Editor
author-avatarFrancesco Tiralongo
Contribution&Funding
Methodology,
[Mozhgan Razzaghi]
Validation,
[Mozhgan Razzaghi] ; [Ahmad Homaei]
Investigation,
[Mozhgan Razzaghi] ; [Ahmad Homaei]
Resources,
[Mozhgan Razzaghi] ; [Ahmad Homaei]
Writing - original draft,
[Mozhgan Razzaghi]
Writing - review,
[editing] ; [Ahmad Homaei]
Supervision,
[Ahmad Homaei]
Project administration,
[Ahmad Homaei]
Funding: --
Citation
Mozhgan Razzaghi, Ahmad Homaei, Multifunctional PDMS Nanocomposites Reinforced with Green-Synthesized MWCNT–Al₂O₃–TiO₂ Nanohybrids for Long-Term Marine Biofouling and Corrosion Protection, in Proceedings of The 2nd International Online Conference on Marine Science and Engineering, 23 November–25 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Multifunctional PDMS Nanocomposites Reinforced with Green-Synthesized MWCNT–Al₂O₃–TiO₂ Nanohybrids for Long-Term Marine Biofouling and Corrosion Protection

Mozhgan Razzaghi 1
1. Marine Biology, University of Hormozgan, Bandar Abbas, 3995, Iran
Abstract

Abstract:

 

Introduction: Maritime biofouling and corrosion impose substantial operational and environmental burdens, while conventional protective systems frequently rely on hazardous biocides. This study presents a durable, biocide‑free polydimethylsiloxane (PDMS) nanocomposite reinforced with a green‑synthesized ternary nanohybrid to concurrently mitigate fouling organisms and electrochemical deterioration.

 

Methods: A hybrid reinforcement of Al₂O₃, TiO₂, and multi‑walled carbon nanotubes (MWCNTs) was fabricated using Avicennia marina leaf extract as a natural reducing and stabilizing agent and dispersed into PDMS at 0.1–2 wt%. Comprehensive characterization employed FTIR, XRD, UV–Vis, and FESEM–EDS. Performance was evaluated through antibacterial and antialgal assays, electrochemical polarization, contact angle goniometry, and a four‑month field immersion trial in the Persian Gulf.

 

Results: Structural analyses confirmed homogeneous nanohybrid dispersion and enhanced optical absorption. The optimized 0.5 wt% formulation exhibited a corrosion current density of 0.008 µA cm⁻², a water contact angle of 109.2°, and a surface free energy of 19.1 mJ m⁻², indicating excellent foul‑release characteristics. Biological assays recorded 95.8% inhibition of Pseudomonas aeruginosa and 98.7% inhibition of Nannochloropsis oculata, demonstrating potent antifouling activity. Following 120 days of immersion in the Persian Gulf, biofouling coverage on the nanohybrid‑reinforced coating remained below 32%, whereas pristine PDMS surfaces were completely overgrown.

 

Conclusions: The developed nanocomposite integrates enhanced corrosion resistance, photocatalytic self‑cleaning, superior foul‑release characteristics, and sustained antifouling performance within a single scalable system. Field‑validated results confirm its strong potential as an environmentally sustainable, biocide‑free alternative for long‑term protection of offshore and coastal infrastructure.

 

Keywords
Keywords: Marine biofouling; PDMS nanocomposite; Green nanotechnology; Corrosion protection; MWCNT–Al₂O₃–TiO₂ nanohybrids; Persian Gulf field test
Spirulina‑Derived Phycocyanin‑Mediated Synthesis of Silver Nanoparticles for PDMS Coatings with Sustained Marine Antifouling Performance
Comparative characterization of lanthanum bioaccumulation and physiological responses in marine benthic cyanobacteria and diatoms.