Earthen reservoirs are essential for storing water for irrigation and water supply, as well as for regulating flow. Traditional methods for estimating their hydraulic behavior require topographic surveys and complex numerical procedures. In this context, a rapid and reproducible approach is proposed for the geometric estimation and preliminary hydraulic evaluation of earthen reservoirs. The approach uses a simplified mathematical model that relates geometric parameters through analytical equations implemented in MATLAB. A method for estimating the reservoir’s area and volume based on its main dimensions was developed using a rectangular geometric model. Sensitivity analysis, nonlinear regression, and least squares were used to fit the equations to geometries of 1:2, 2:3, and 1:3, with volumes ranging from 0.1 Hm³ V min to 5 Hm³ Vmax Hm³, depths between 0.1 Hmin and 18 Hmax m, and slopes ranging from to 40%. Calibration was performed using 100 cal geometries, and validation using 34 val independent geometries. The uncertainty in area and volume was evaluated using a Monte Carlo simulation. The volume and area estimates yielded R² values greater than 0.98. Slope angle and maximum depth were the geometric parameters that showed the greatest sensitivity. The relative errors were less than 5%, calculated with respect to the reference geometric values determined using the analytical formulations developed for reservoir geometries. The methodology enables estimation of the geometric parameters of earthen reservoirs and serves as a complementary tool for preliminary hydraulic evaluation. Its implementation in MATLAB facilitates automation, scenario analysis, and integration with hydrological and hydraulic models.