Monitoring pressure conditions during emptying operations is important for preventing harmful sub-atmospheric pressures in long and branched water pipelines. However, conventional experimental assessment requires repeated measurements for each operating configuration, limiting its applicability for rapid operational evaluation. This study presents a technological prototype that integrates remote pressure sensing, wireless data transmission, and Transformer-based artificial intelligence for the assessment of minimum pressures during pipeline emptying. A 5.2-m-long transparent branched pipeline was instrumented with a digital pressure transducer located at a critical air-accumulation point. The measured pressure signal was transmitted through a Bluetooth communication link to acquisition software, enabling remote capture and processing of the experimental measurements. The prototype was used to generate a dataset of 291 experimental operating conditions combining initial water-column lengths, sectionalising-valve configurations, drainage-valve states, and air-admission conditions. Twelve hydraulic and operational variables were used as predictors of the minimum gauge pressure measured at the critical location. A TabTransformer regression model was subsequently implemented to learn the nonlinear relationships between the operational conditions and the pressure response. The model achieved an R2 of 0.9715, RMSE of 0.0379 m, and MAE of 0.0266 m. Once trained, the model provided rapid pressure estimation for alternative operating configurations, reducing the need to experimentally reproduce each scenario. The proposed prototype demonstrates the potential of combining wireless sensing and artificial intelligence to develop remote monitoring and decision-support technologies for hydraulic infrastructure, providing a basis for the rapid assessment of pipeline emptying operations and the identification of conditions associated with critical negative pressures.