Pharmaceutical and healthcare-related wastewater contain antibiotics and heavy metals that can enter aquatic environments. Residual antibiotics promote antimicrobial resistance, and heavy metals can cause toxic effects. Their simultaneous occurrence results in interactions such as antibiotic–metal complex formation, which can modify their mobility, persistence, bioavailability, and potential toxicity. Therefore, the effective removal of both contaminant groups is important for improving water quality and reducing potential risks to human health and medical safety. Here, the adsorption behaviour of a Cu(II)-6-aminopenicillanic acid (6-APA) complex was investigated using a silane/alginate/chitosan-modified Vermiculite composite (V-Alg-Chi-Si).
The V-Alg-Chi-Si was prepared by silane functionalization of Vermiculite, followed by coating with alginate and chitosan. Cu(II)-6-APA (1:1 molar ratio, pH 6.0) was confirmed by UV-Vis and FTIR. Batch experiments were conducted at 25°C and 150 rpm to study the effects of pH, contact time, initial concentration, dosage, and molar ratio in single-, binary-, and ternary-system experiments. Data were fitted to kinetic and FTIR, XRD, and SEM. Isotherm models and the adsorbent.
Cu interacts with 6-APA through carboxylate, amino, and carbonyl groups. At low to moderate Cu levels, complexation enhances 6-APA adsorption onto the composite's active sites. At higher concentrations, competition and site saturation reduce removal. FTIR shifts and Cu detection by SEM-EDS confirmed complexation and surface adsorption.
The V-Alg-Chi-Si composite exhibited a maximum adsorption capacity of 118.6 mg/g for Cu(II)-6-APA, significantly higher than unmodified vermiculite (62.3 mg/g). The data followed the pseudo-second-order model (R² > 0.99) and Langmuir isotherm, indicating monolayer chemisorption. The V-Alg-Chi-Si demonstrated substantially improved adsorption performance and showed promising potential for the simultaneous treatment of antibiotic-related compounds and heavy metals in pharmaceutical and healthcare-associated wastewater. Differences between single and multicomponent conditions also highlight the importance of contaminant interactions in realistic pharmaceutical wastewater.