EventsThe 10th International Electronic Conference on Water Sciences
Published
This submission belongs to the session S8. Wastewater Treatment and Reuse of the event The 10th International Electronic Conference on Water Sciences
Published date
19 Nov, 2026
Academic Editor
author-avatarChristos S. Akratos
Contribution&Funding
Conceptualization,
[Aryan Sharma]
Methodology,
[Aryan Sharma]
Software,
[Aryan Sharma]
Validation,
[Aryan Sharma]
Formal analysis,
[Aryan Sharma]
Investigation,
[Aryan Sharma]
Data curation,
[Aryan Sharma]
Writing - original draft,
[Aryan Sharma]
Writing - review,
[editing] ; [Aryan Sharma]
Visualization,
[Aryan Sharma]
Supervision,
[Sangjun Noh]
Project administration,
[Sangjun Noh]
Funding: --
Citation
Aryan Sharma, Sangjun Noh, Peter Burke, VIR-CDI: Novel Voltage-Incremented Ramping Capacitive Deionization for Energy Efficient, Scalable, and Selective Physicochemical Nitrate Removal from Water, in Proceedings of The 10th International Electronic Conference on Water Sciences, 24 November–27 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

VIR-CDI: Novel Voltage-Incremented Ramping Capacitive Deionization for Energy Efficient, Scalable, and Selective Physicochemical Nitrate Removal from Water

Sangjun Noh 2
1. Orange County School of the Arts, Santa Ana, 92701, USA
2. Samueli School of Engineering, University of California, Irvine, 92603, USA
Abstract

Nitrate contamination of freshwater is a major environmental challenge. Fertilizer runoff introduces nitrates into waterways, driving eutrophication, harmful algal blooms, and oxygen depletion, while nitrate exposure has been linked to methemoglobinemia and gastrointestinal cancers. Meeting regulatory limits remains difficult due to the energy intensity and limited selectivity of conventional technologies such as reverse osmosis (RO).

Capacitive deionization (CDI) is a water-treatment method in which an electric field drives ions into porous carbon electrodes through electric double layer adsorption. CDI operates at standard pressures and temperatures and requires less infrastructure than RO, but traditional operation suffers from competitor-ion adsorption and energy consumption. While nonpotentiostatic strategies have been explored for desalination, voltage stepping for selective nitrate removal remains unexplored.

This study developed and evaluated voltage-incremented ramping CDI (VIR-CDI) in batch mode. Using synthetic wastewater containing 300 mg/L KNO₃ and 300 mg/L NaCl, voltage profiles ranging from constant 1.2 V operation to stepwise increases from 0.4 to 1.2 V were tested. Ramped profiles achieved up to 92.6% nitrate removal, selectivity coefficients of 2.3, and nitrate-to-chloride molar-ratio reductions of 9.6-fold. Specific energy consumption reached as low as 0.12 kWh·m⁻³, while productivity reached 12.8 mg·g⁻¹·min⁻¹. All ramped samples met the World Health Organization’s 50 mg/L nitrate limit.

Performance improvements are attributed to gradual electric double layer development, which delays chloride saturation and promotes preferential nitrate adsorption under increasing electrostatic driving forces. These results demonstrate that voltage optimization alone can enhance nitrate selectivity and reduce energy intensity without chemical electrode functionalization. VIR-CDI therefore advances understanding of electric double layer behavior under nonpotentiostatic conditions while offering a scalable approach to nutrient-contaminated water remediation, with potential applications in both municipal treatment systems and low-energy rural water infrastructure.

Keywords
Capacitive Deionization
Voltage Incrementation Ramping (VIR)
Nitrate Removal
Electrosorption Selectivity
Electric Double Layer Physics
Energy-Efficient Water Treatment
Alginate Composite Beads as Adsorbents for Iron Removal from Aqueous Solutions
Microplastics as Carriers for Parabens: Resilience of Chlorella vulgaris and the Effects on Wastewater Bioremediation