The brewing industry generates large volumes of highly polluted wastewater, characterized by elevated organic load and nutrient concentrations that threaten aquatic ecosystems. Constructed Wetlands (CWs) provide a sustainable and cost-effective treatment solution achieving high pollutant removal, but they rely heavily on the capabilities and synergy between the substrate materials, the plants and the hydraulic conditions. Three pilot-scale horizontal subsurface flow constructed wetlands units with different substrate materials were operated over four years: (1) an unvegetated control unit with gravel-zeolite, (2) a vegetated unit with gravel-zeolite, (3) a vegetated unit with gravel-palygorkite. The vegetated units were planted with Phragmites australis. All units were evaluated across three hydraulic times (HRTs) of 8,4 and 2 days monitoring the removal of COD, NH4+ and PO43-. Sampling was performed at two points along the flow path: at 2/3 of the bed length and at the outlet. At an 8-day HRT, all units achieved high removal rates (>80% for COD, >90% for NH4+ and PO43-). As the HRT was reduced to 2 days, NH4+ removal remained stable (>92%), highlighting the efficiency of zeolite-based ion-exchange. PO43- removal was more sensitive to HRT, although the palygorskite-based unit maintained higher relative efficiency. Spatial analysis revealed that >80% of pollutant reduction occurs within the first 2/3 of the bed length, with minimal concentration changes observed towards the outlet. High pollutant removal rates remain consistent even at short hydraulic retention times, demonstrating the reliability of zeolite and palygorskite. Overall, the study demonstrates the potential of substrate optimization and hydraulic management to enhance the performance of constructed wetlands treating brewery wastewater.