EventsThe 10th International Electronic Conference on Water Sciences
Published
This submission belongs to the session S8. Wastewater Treatment and Reuse of the event The 10th International Electronic Conference on Water Sciences
Published date
19 Nov, 2026
Academic Editor
author-avatarChristos S. Akratos
Citation
Donya Ahmadvand, Mohammad Salimi Delshad, Hossein Bonakdari, Machine Learning-Based Prediction of Biogas Yields from Multiple Feedstocks Using an ADM1-Informed Hybrid Framework, in Proceedings of The 10th International Electronic Conference on Water Sciences, 24 November–27 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Machine Learning-Based Prediction of Biogas Yields from Multiple Feedstocks Using an ADM1-Informed Hybrid Framework

Mohammad Salimi Delshad 1
image
1. Department of Civil Engineering, University of Ottawa, 161 Louis Pasteur Private, Ottawa, ON K1N 6N5, Canada
Abstract

Introduction: Anaerobic digestion (AD) is a widely employed biological process for converting organic waste into biogas, primarily methane (CH4) and carbon dioxide (CO2). Despite its role in renewable energy recovery and wastewater management, accurate prediction of biogas yields across diverse feedstocks remains a challenge. Mechanistic models such as the Anaerobic Digestion Model No. 1 (ADM1) provide simulation frameworks but are constrained by extensive parameterization requirements for each feedstock. Data-driven machine learning (ML) methods offer complementary speed and pattern recognition capability.

Methods: A hybrid simulation ML framework was developed by integrating ADM1 as a structured data generator with four supervised ML algorithms: Random Forest (RF), LightGBM, Support Vector Regression (SVR), and a Stacking ensemble. ADM1 was implemented for six feedstocks: Biowaste, Feed Residues, Maize and Cattle Manure Co-digestion, Pig Manure, Vinasses, and Wastewater Treatment Sludge under dynamic mesophilic conditions over 100-day simulations. ADM1 state variables were used as ML inputs, with daily CH4 and CO2 production rates as target outputs.

Results: SVR showed the strongest performance, especially for Biowaste, while LightGBM provided relatively stable performance across most feedstocks; Stacking was highly competitive for Food Residue and Maize-Cattle Manure Co-digestion, whereas RF showed good performance in some cases but was less consistent overall. Among the feedstocks, Food Residue was the easiest to predict because all models achieved high R2 values for both CH4 and CO2, while Biowaste also showed strong prediction accuracy. In contrast, Maize and Cattle Manure Co-digestion was the most difficult prediction , showing the lowest R2 values, particularly for CH4 prediction.

Conclusions: This study demonstrates that simulation-informed ML, using ADM1 as a mechanistic data generator, constitutes an approach for predicting biogas production and composition across diverse organic substrates without reliance on extensive experimental measurements. The proposed framework offers significant potential for process optimization and operational decision-support in multi-feedstock anaerobic digestion facilities.

Keywords
Anaerobic Digestion (AD)
ADM1
Machine Learning (ML)
Biogas Prediction
Methane Production.
Polymer ligand composed from waste cellulose for heavy metal removal from electroplating wastewater
From Colloidal Behaviour to Surface Interactions: Mechanistic Investigation of Polyethylene Nanoplastic Adsorption