EventsThe 10th International Electronic Conference on Water Sciences
Published
This submission belongs to the session S8. Wastewater Treatment and Reuse of the event The 10th International Electronic Conference on Water Sciences
Published date
19 Nov, 2026
Academic Editor
author-avatarChristos S. Akratos
Citation
Sándor Beszédes, Dielectric Process Monitoring in Sludge Treatment, in Proceedings of The 10th International Electronic Conference on Water Sciences, 24 November–27 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Dielectric Process Monitoring in Sludge Treatment

image
1. Department of Biosystems Engineering, Faculty of Engineering, University of Szeged, Szeged, HU-6725, Hungary
Abstract

Real-time monitoring methods are highly relevant in sludge treatment technologies because these technologies consist of biological, chemical, and mechanical processes in which process conditions can rapidly change. Conventionally used analytical methods (such as COD, BOD, VFA, TOC, GC, TS/VS, microbial assays, etc.) need chemicals and are generally time-consuming, labour-intensive, destructive, and often provide only delayed ’offline’ information. Since dielectric properties are strongly influenced by water binding, ionic mobility, dissolved compounds, microbial activity, and physicochemical composition, dielectric measurements are highly sensitive to biochemical transformations. From engineering perspectives, the real-time monitoring is essential because sludge treatment and anaerobic digestion systems are highly energy-intensive (and therefore high cost) operations. In the research the different stages of municipal wastewater treatment were monitored by conventional analytical method and dielectric behaviour analysis (Speag DAK 3.5 dielectric sensor). Thermal and chemical sludge pre-treatments and batch mesophilic anaerobic digestion process of sludge were also under investigation. Strong correlations were observed between dielectric parameters and sludge disintegration efficiency, with dielectric measurements performed at 500 MHz exhibiting an R² = 0.9 with SCOD changes caused by different sludge pre-treatment methods (microwave treatment, ferric magnetic nanoparticle dosage, microwave-Fenton method, alkaline treatment). The maximum rate of dielectric constant variation exhibited a strong correlation with methane-production kinetics (R² > 0.9), furthermore also with cumulative biogas production (R² > 0.83) indicating that dielectric monitoring can effectively characterize microbial activity. Dielectric measurements are non-destructive, rapid, reagent-free, and potentially suitable for inline or online sensor integration into industrial systems. Real-time dielectric sensing can therefore support adaptive process control under fluctuating feed compositions, improving process robustness and operational reliability. These characteristics make them highly attractive for Industry 4.0-oriented smart wastewater-treatment plants and AD plants as well.

Acknowledgement: The research was financed by National Research, Development and Innovation Office (NKFI, Hungary) FK 146344 project.

Keywords
sludge
dielectric parameters
monitoring
anaerobic digestion
Assessing long-term pollutant removal efficiency in constructed wetlands and wastewater reuse
Impact of Straw Mulching on Soil Hydrothermal Dynamics and Irrigation