EventsThe 3rd International Online Conference on Biomimetics
Published
This submission belongs to the session S2. Biomimetic Materials—Structures, Surfaces and Interfaces of the event The 3rd International Online Conference on Biomimetics
Published date
19 Nov, 2026
Academic Editor
author-avatarYongmei Zheng
Contribution&Funding
Methodology,
[Sotiria Lili] ; [Sofia Kavafaki] ; [Konstantinos Pelpas]
Investigation,
[Sotiria Lili]
Writing - original draft,
[Sotiria Lili]
Writing - review,
[editing] ; [Sofia Kavafaki] ; [Georgios Maliaris]
Supervision,
[Georgios Maliaris]
Funding: --
Citation
Sotiria Lili, Sofia Kavafaki, Konstantinos Pelpas, Georgios Maliaris, Chitosan-Coated TPMS PLA Scaffolds: A base for Bone Tissue Engineering: Structural Mechanical Characterization, in Proceedings of The 3rd International Online Conference on Biomimetics, 24 November–26 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Chitosan-Coated TPMS PLA Scaffolds: A base for Bone Tissue Engineering: Structural Mechanical Characterization

Sotiria Lili 1
image
Konstantinos Pelpas 1
image
1. Chemistry, Democritus University of Thrace, Kavala, 65404, Greece
Abstract

3D Printing offers the possibility to produce triphasic gradient structures to mimic physical and mechanical properties of biological tissue. In this study, triply periodic surface (TPMS) architectures, such as Gyroid and IWP scaffolds, with a porosity around 80%, were designed and fabricated to resemble the performance of trabecular bone, establishing them as a foundation for tissue engineering.

The scaffolds were initially printed via fused deposition modeling (FDM) using polylactic acid (PLA), an aliphatic polyester that degrades into lactic acid through hydrolysis, a metabolite safely absorbed by the body. To further enhance their bioactivity, biocompatibility, and surface functionality, the scaffolds underwent a double vacuum-assisted dip coating in chitosan solution - a naturally derived polysaccharide with reactive amine groups - at three concentrations (1%, 2% and 3% w/w). [1],[2],[3]

Chemical and surface treatment were confirmed through Fourier-Transform Spectroscopy (FTIR) analysis, showcasing characteristic chitosan functional group signals integrated in the PLA backbone spectra, with peak intensity scaling with coating concentration. Additionally, Micro-Computed Tomography (μ-CT) was used to quantify pore architecture, porosity, strut thickness and surface area before and after the coating, confirming coating-induced geometric alterations, while preserving the biomimetic features of the original TPMS architectures. Lastly, Quasi-static mechanical compression testing (ASTM D1621) evaluated the effective stiffness and yield behavior of Gyroid and IWP topologies across the three coating concentrations.

Results indicate that increasing chitosan concentration systemically influences both microstructural features and compressive performance of the scaffolds. Notably, the IWP and Gyroid structures exhibited different surface modification regarding coating thickness due to their distinct surface-to-volume ratios and curvature distributions. Ultimately, the combination of PLA and chitosan balances a desired mechanical behavior and bioactivity, supporting the scaffolds’ potential as a baseline for developing advanced biomimetic structures for tissue engineering.

Keywords
TPMS scaffolds; PLA; FDM; chitosan coating; micro-CT; FTIR; mechanical characterization; tissue engineering; biomimetic porous structures
Pharmacokinetic studies of orally administered drugs using biomimetic liquid chromatography and computational descriptors