Introduction: Oil microdroplets dispersed in water are difficult to remove efficiently, particularly when sustainable separation materials are sought. Cellulose-based fibrous membranes are attractive candidates because their morphology and interfacial properties can be tailored to control oil/water interactions. In this work, cellulose nanocrystals (CNCs) were directly incorporated into electrospun cellulose acetate (CA) membranes and their performance for oil microdroplet removal from water was evaluated.
Methods: CA/CNC membranes were produced by electrospinning followed by thermal treatment at 160 °C. Membrane morphology, underwater oil wettability, aqueous stability and oil-removal performance were assessed using oil-in-water dispersions. Single membranes and multilayer assemblies were compared.
Results: CNC incorporation preserved the characteristic fibrous morphology of the electrospun membranes, with fibre diameters comparable to those of neat CA. Thermally treated membranes remained stable after prolonged immersion in water and exhibited oil-repellent behaviour under water. Oil-removal efficiencies reached approximately 74–82% for single membranes, depending on thermal treatment, and increased to nearly 94% for four-layer assemblies. Filtration also reduced the size range of the remaining dispersed oil droplets.
Conclusions: Direct incorporation of CNCs into electrospun cellulose-based membranes provides an effective approach for oil microdroplet removal from water. The combination of aqueous stability, favourable oil/water interfacial behaviour and high removal efficiency highlights the potential of these membranes for sustainable oil/water separation applications. The use of a single biodegradable, biocompatible, and easily recyclable material, such as cellulose, also prevents the introduction of synthetic polymers, not naturally occurring in nature, into the environment.