Earthworms play a critical role in maintaining soil health by creating burrow networks that facilitate gas exchange, water infiltration, and root penetration. Anecic earthworm burrows form deep vertical passages that allow atmospheric air and water to reach lower soil layers, while endogeic burrows interconnect pore spaces to enhance overall soil tilth and porosity. However, earthworm activity is highly sensitive to environmental conditions: extreme temperatures (below 40°F or above 70°F) and moisture imbalances, whether waterlogged or excessively dry soils, can suppress or eliminate earthworm populations, disrupting these natural aeration processes. This study proposes a bio-inspired, biodegradable structure fabricated via fused deposition modeling (FDM) additive manufacturing to replicate the soil-aeration function of earthworm burrows independent of biological or environmental constraints. The printed structure incorporates interconnected channel geometries designed to mimic the passage networks created by earthworms, enabling artificial gas exchange, water percolation, and pathways for root growth even in conditions unsuitable for natural earthworm activity. By using biodegradable polymer feedstock, the structure is intended to degrade gradually within the soil, providing temporary aeration support during critical growth periods without introducing long-term synthetic waste. This work demonstrates the feasibility of additive manufacturing as a tool for producing low-cost, scalable, nature-inspired soil amendment structures, and discusses the design rationale, fabrication process, and potential agricultural applications of the proposed system for improving soil aeration in environments where natural earthworm activity is limited.