Owls fly silently; wind turbines do not. The fringed trailing edge of the owl wing has inspired serrated blade edges that are now industrial practice, yet the rules for designing them derive almost entirely from two-dimensional airfoil coupons at low aerodynamic loading. Whether the biological principle survives on a rotating, loaded blade, and what it costs in power, has remained open. This study quantifies both.
We couple a blade-element description of a complete rotor to the Brooks–Pope–Marcolini self-noise model and Howe's analytical serration theory, so that acoustic benefit and aerodynamic cost are evaluated together, in decibels and watts, fast enough to sweep the design space. Three owl-derived edge geometries were screened over height, wavelength, wind speed and angle of attack: a sinusoid, a sawtooth, and a dual-scale profile mimicking the feather's multi-scale structure.
The principle transfers, but conditionally. Individual frequency bands are attenuated by up to 11 dB, yet the overall attenuation at the design point is 1.3–2.2 dB. The model identifies two principal constraints on serration effectiveness: it is acoustically inert below the crossover frequency f× = U/2πh (inflow speed U, serration height h), and it cannot touch separation noise, which supplies half the radiated energy at 5° incidence. Attenuation therefore collapses from 8.4 dB at zero loading to zero near stall, a dependence invisible in coupon tests. Wind speed, by contrast, shifts it by less than 0.1 dB. Within the present model, the predicted power penalty is approximately geometric, scaling as ΔP/P ≈ h/c, the ratio of serration height to blade chord. The acoustic gain instead scales with the sharpness h/λ (height over wavelength). Within the explored design space, the resulting design rule favours the tallest serrations within the allowable power budget and shorter manufacturable wavelengths. The most owl-like of the three, the dual-scale profile, holds no advantage over a plain sawtooth once its free parameters are varied. The framework provides a physics-grounded screen for bioinspired edge design ahead of computational fluid dynamics or wind-tunnel testing, identifying where the owl's geometry delivers and where it cannot.