Biological apatite is a non-stoichiometric, ion-substituted calcium phosphate containing Mg²⁺, Na⁺, CO₃²⁻, and F⁻, whose ionic composition strongly influences crystal structure, crystallinity, solubility, and biological performance. Reproducing this compositional complexity is an important strategy in the development of biomimetic apatite-based materials. In particular, Mg²⁺ substitution is of interest because magnesium is naturally present in bone mineral and plays an important role in apatite formation and bone mineralization, while fluoride can enhance the structural stability of the apatite lattice. However, conventional synthesis routes often require prolonged processing and high-temperature calcination, which can alter the physicochemical characteristics of nanoscale apatite. Therefore, low-temperature synthesis strategies are of particular interest for obtaining biomimetic apatite materials under mild processing conditions.
In this study, magnesium-substituted fluorapatite nanoparticles were synthesized by an aqueous precipitation method at 60 °C using a thermostatically controlled water bath. The influence of Mg²⁺ incorporation on the structural, morphological, and thermal properties of the synthesized powders was investigated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (FESEM/EDS), and thermogravimetric analysis (TG).
XRD confirmed the formation of fluorapatite as the main crystalline phase for all investigated compositions, with no detectable crystalline secondary phases. The incorporation of Mg²⁺ induced systematic changes in the apatite lattice parameters, while FTIR spectra confirmed the characteristic phosphate vibrational bands of the apatite structure. FESEM revealed nanosized rod-like particles, and EDS confirmed the presence of the expected elemental constituents. TG analysis demonstrated good thermal stability of both pure and Mg-substituted fluorapatite powders. Notably, the aqueous precipitation route enabled the formation of highly crystalline Mg-substituted fluorapatite nanoparticles within only 4 h at 60 °C, without the need for subsequent high-temperature calcination.
Overall, the results demonstrate that the proposed low-temperature aqueous route provides a simple and efficient approach for the preparation of phase-pure, nanoscale Mg-substituted fluorapatite under mild conditions. The combination of biomimetic ionic substitution, nanoscale morphology, and low-temperature processing makes these materials promising candidates for future bone regeneration and bioactive coating applications. Further evaluation in simulated body fluid (SBF) will be performed to assess their apatite-forming ability and in vitro bioactivity.