The widespread occurrence of segmented/fragmented structures in nature has inspired scientists
to create strong materials from weak, brittle components. This has driven research into
understanding how segmented materials work mechanically. A key debate in this field concerns
whether these segmented arrangements should be called “structures” or “materials,” since they
differ from conventional material definitions. In this study, we create a computer simulation that
forecasts how an array of elastic blocks arranged as a beam behaves under sideways loading,
with the blocks increase number and interacting through contact friction. Despite several
research work on TIMs and on segmented/fragmented beams and panels, the connection between
fragmentation and TIM’s remain unclear yet fragmentation often gives rise to structures. Because
studies typically consider these systems separately, it is difficult to understand how segmented or
fragmented structures, such as masonry, relate to fragmented materials. An important question is
whether increasing the number of blocks in a segmented structure eventually causes it to behave
as material. We address this by progressively increasing block count and friction between blocks
to determine when a segmented assembly begins to behave as a material. Using simulations
validated by experiments, we identify the point at which a segmented structure transitioned into a
material. In this work, we focus on a fragmented beam for identifying the thresholds at which a
structure transitions into a material. An array of N identical elastic blocks is considered (Fig. a).
This work considers odd number of blocks only. Each block has a side length of L = 5 mm. To
ensure mechanical interaction and static equilibrium among the blocks, we subject their lateral
faces to an axial pre-stress of 𝐹𝐴/𝐸𝐿2=4.05×10-3. The blocks rest on rigid abutments of length
0.1L. Upon applying a transverse load FT to the central block located at x = NL/2, this block
undergoes a vertical downward displacement. normal contact enforcement implemented via an
augmented Lagrangian algorithm. As such the blocks deflect by an amount, d (Fig. b). The
overall motion of the array: block translations, local deformations, and rotations, is governed by
the parameters (𝐹𝐴/𝐸𝐿2, N, f, L). We ran the FEM for 𝑓 = 0,0.2,1.0,and 7, from low friction to
extreme levels, for 𝑁 = 3,5,7,9,and 11 blocks, using the same elastic and axial force parameters
as before. Figure. C compiles all the force–deflection plots (𝐹𝑇 − 𝑑)for parametric sweep. For
the frictionless cases (𝑓 = 0), shown in the first column, the solver registered extremely low
forces near the machine zero ∼ 10−13 N, and thus indeed the system is unstable and the solver
could not proceed except for a few pseudo increments. Therefore, without friction the segmented
beam cannot maintain stability and has no load-bearing capacity (Fig. c). In the Fig. C, there are
insets in each plot showing the undeformed and deformed beams.another mode of deformation
where the blocks bend like a continuous beam, characterized by the tendency of the interfaces to
open due to block rotation, which we called “hinging”. The objective of this work is to
understand the effect of the parameters (N, f) on the global kinematics of the segmented beam
and on the resulting force–deflection response FT−d. the FEM model captures the essential
physics of the segmented beam reasonably well, though with increasing deviation as the number
of blocks 𝑁 becomes larger. After confirming our model with experimental data, we explore
different designs by varying block count and friction levels. With the model verified, a
parametric study over (N, f ) showed that friction stabilizes the segmented beam and increases its
strength and stiffness, while increasing N softens the beam and lowers its strength. This
behaviour is analogous to increased bonding or scale separation in lattice materials and
composites.