Introduction: Studying the flight of birds can provide a lot of inspiration for the design of future drones and airplanes and deepen our understanding of bird ecology. Fixed taxidermies have been used in ecological studies and aerodynamic investigations of avian flight. Building morphing bird taxidermies has the potential to extend future studies incorporating aspects of bird flight while avoiding the challenges of live bird testing. However, creating such morphing taxidermies imposes serious challenges, such as the limited space inside the bird’s dead body for electronic components and the rapid desiccation of the integument. Methods: This work presents a first successful attempt to build a morphing taxidermy of a red-tailed hawk. Novel mechanisms were developed to morph the wings and tail of the prototype, which includes real feathers and is covered by the bird’s real skin. The design features wings that can morph independently by spreading their feathers, a tail with pitch, roll, and feather-spread capabilities, along with a fuselage that interconnects all systems with the bird’s carcass. The design combines a compact 3D-printed fuselage that strategically houses all electronic components and artificial 3D-printed bones that mimic the bird’s extracted natural bones, along with the extracted natural feathers, the skin of the full bird, and the bird’s actual head. Results: Actuation tests performed on the proof-of-concept model demonstrated the effectiveness of the proposed design and validated the design choices. Multi-cycle actuation tests demonstrated morphing consistency. Conclusions: The study proved that building a bird morphing taxidermy is viable, despite all technical challenges. Future work will focus on refining the manufacturing process, introducing more morphing degrees of freedom, applying the same approach on different bids, and conducting experimental aerodynamic studies in a wind tunnel.