EventsThe 3rd International Online Conference on Biomimetics
Published
This submission belongs to the session S2. Biomimetic Materials—Structures, Surfaces and Interfaces of the event The 3rd International Online Conference on Biomimetics
Published date
19 Nov, 2026
Academic Editor
author-avatarVictor Erokhin
Contribution&Funding
Conceptualization,
[Mehdi Khodaei]
Investigation,
[Vida Fathollahzadeh]
Data curation,
[Vida Fathollahzadeh]
Writing - original draft,
[Vida Fathollahzadeh]
Writing - review,
[editing] ; [Mehdi Khodaei]
Supervision,
[Mehdi Khodaei]
Funding: --
Citation
Mehdi Khodaei, Vida Fathollahzadeh, Biomimetic Piezoelectric Scaffolds for Bone Regeneration: 3D-Printed PVDF/BaTiO₃ Nanocomposites on Titanium, in Proceedings of The 3rd International Online Conference on Biomimetics, 24 November–26 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Biomimetic Piezoelectric Scaffolds for Bone Regeneration: 3D-Printed PVDF/BaTiO₃ Nanocomposites on Titanium

Vida Fathollahzadeh 1
1. Faculty of Materials Science and Engineering, K. N. Toosi University of Technology, Tehran, Iran
Abstract

Bone tissue inherently possesses a piezoelectric property that enables mechanoelectrical transduction, converting physiological mechanical loads into bioelectrical signals that regulate osteogenesis and bone remodeling. Inspired by this natural phenomenon, this study develops a biomimetic scaffold that replicates both the structural and functional electroactive characteristics of native bone for enhanced bone regeneration. We fabricated piezoelectric scaffolds via hot-solvent-based extrusion (HSBE) 3D printing using polyvinylidene fluoride (PVDF) dissolved in N,N-dimethylformamide (DMF), with barium titanate (BaTiO₃) nanoparticles incorporated at 0 and 10 wt.% as a reinforcing phase. The scaffolds were deposited onto titanium substrates to provide mechanical robustness and facilitate potential osseointegration. Printing was conducted at 60 °C to thermodynamically favor the crystallization of the electroactive β-phase of PVDF, which structurally mimics the oriented polar collagen fibrils responsible for bone's native piezoelectricity. The piezoelectric response was evaluated under cyclic mechanical loading (2.6 N at 5 Hz), simulating physiological conditions such as walking. The neat PVDF scaffold generated an average output voltage of 1.16 mV (sensitivity: 0.23 mV/N). Remarkably, the incorporation of 10 wt.% BaTiO₃ significantly enhanced performance, raising the output voltage to 1.78 mV and sensitivity to 0.35 mV/N—an improvement of over 50%. This enhancement is attributed to increased β-phase crystallization, stronger dipole interactions, and hydrogen bonding among PVDF, BaTiO₃, and DMF, which together amplify electromechanical coupling efficiency. By generating physiologically relevant electrical cues in response to mechanical stress, these 3D-printed nanocomposite scaffolds on Ti substrates offer a promising biomimetic platform for bone tissue engineering. This self-powered, stimuli-responsive system holds great potential for next-generation smart implants capable of promoting osteogenesis without exogenous growth factors or external electrical stimulators, addressing a critical need in orthopedic and dental regenerative medicine.

Keywords
Biomimetic scaffolds
Piezoelectricity
Bone regeneration
3D printing
PVDF/BaTiO₃ nanocomposite
Mechanoelectrical.
Biological Compatibility of Urban Floral Waste as Feedstock for Mycelium Biofabrication of Interior Architectural Panels
Versatile Matrix of Biomimetic Factors: A Concurrent Systemic Approach for Innovation in User Experience (UX), Affective Design, and Sustainability