EventsThe 3rd International Online Conference on Biomimetics
Published
This submission belongs to the session S2. Biomimetic Materials—Structures, Surfaces and Interfaces of the event The 3rd International Online Conference on Biomimetics
Published date
19 Nov, 2026
Academic Editor
author-avatarYongmei Zheng
Contribution&Funding
Conceptualization,
[Taisiya Bolkhovskaya]
Methodology,
[Taisiya Bolkhovskaya]
Software,
[Polina Kortikova]
Validation,
[Taisiya Bolkhovskaya]
Formal analysis,
[Taisiya Bolkhovskaya]
Investigation,
[Taisiya Bolkhovskaya]
Resources,
[Evgeny Bulanov]
Data curation,
[Polina Kortikova]
Writing - original draft,
[Taisiya Bolkhovskaya]
Writing - review,
[editing] ; [Taisiya Bolkhovskaya]
Visualization,
[Taisiya Bolkhovskaya]
Supervision,
[Evgeny Bulanov]
Project administration,
[Taisiya Bolkhovskaya]
Funding: --
Citation
Taisiya Bolkhovskaya, Polina Kortikova, Evgeny Bulanov, Effect of Fluoride Incorporation Strategy on the Crystallinity and Colloidal Stability of Biomimetic Calcium Phosphates, in Proceedings of The 3rd International Online Conference on Biomimetics, 24 November–26 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Effect of Fluoride Incorporation Strategy on the Crystallinity and Colloidal Stability of Biomimetic Calcium Phosphates

1. Chemistry department, Lobachevsky University, Nizhny Novgorod, 603022, Russia
Abstract

Fluoridated apatites are promising biomimetic materials for dental and orthopedic applications owing to their enhanced chemical stability and biological performance. However, the extent of fluoridation and the resulting material properties strongly depend on the synthesis route. The aim of this work was to evaluate how different fluoride incorporation strategies affect the crystal structure and colloidal behavior of apatite-like calcium phosphates.

Apatite precipitates were synthesized from aqueous Ca(NO₃)₂ and (NH₄)₂HPO₄ solutions at pH 7. Sodium fluoride was introduced (i) before precipitation (A1), (ii) after precipitate formation (A2), or (iii) together with NaOH during pH adjustment (A3). A reference sample (A4) was prepared without fluoride followed by post-synthesis ion exchange in NaF solution. Phase composition and crystallinity were investigated by X-ray diffraction (XRD), while colloidal stability was evaluated from the sedimentation behavior of aqueous dispersions during centrifugation.

All samples exhibited an apatite-like structure with characteristic reflections near 25.9° ((002)) and 31–33° 2θ ((211)/(112)/(300)). The highest crystallinity was observed for sample A4, whereas among the fluoridated materials the crystallinity decreased in the order A2 > A3 > A1. Early fluoride addition (A1) resulted in pronounced peak broadening, indicating the formation of poorly crystalline and partially amorphous calcium phosphate.

Fresh precipitates treated with NaF formed highly stable colloidal dispersions that remained suspended after centrifugation, whereas the aggregated reference sample A4 sedimented readily. This behavior is consistent with the formation of a fluorinated surface layer that may increase the ζ-potential and suppress particle aggregation.

The results demonstrate that the fluoride incorporation strategy provides an effective tool for tailoring both the crystallinity and colloidal stability of biomimetic calcium phosphates. Such control is important for the development of injectable calcium phosphate systems and other dispersed biomaterials for biomedical applications.

Keywords
biomimetic calcium phosphates; fluoridated apatite; hydroxyapatite; fluoride incorporation; crystallinity; colloidal stability; injectable biomaterials; X-ray diffraction
Chitosomes as an innovative matrix for biotechnological and food applications
Biomimetic Porous Wrinkle Surfaces for Lossless Droplet Pickup, Transfer, and Splitting