This work presents a lotus/rose biomimetic strategy for lossless droplet operation on a mechanically switchable superhydrophobic surface. Open-surface liquid handling often requires two apparently competing functions: strong temporary adhesion for capture, pickup, splitting, or transfer, and clean release without residue after the operation. Lotus leaves achieve low adhesion through an air-retained Cassie-Baxter-like interface, whereas rose petals can pin droplets strongly while maintaining a nearly spherical superhydrophobic droplet state. Inspired by this contrast, we designed a porous wrinkled surface that combines lotus-like trapped air with strain-induced rose-petal-like pinning, allowing droplets to be captured only when needed and released cleanly afterward.
Polycaprolactone microparticles with diameters of 3-6 um were electrosprayed and assembled into a particulate coating on a pre-strained acrylic elastomer. Releasing the pre-strain generated microscale wrinkles, and CF4 plasma fluorination created a low-surface-energy coating. The same porous particle/fiber network that formed the wrinkle surface also produced submicron voids capable of retaining air. In-plane tensile strain was used as the actuation input: increasing strain enhanced droplet pinning for capture, while relaxing strain restored a cleaner release state. We evaluated static contact angle, sliding angle, droplet pickup volume, reversible two-surface pick-and-drop transfer, liquid-bridge splitting, release after operation, and residue by dyed-droplet removal and fluorescence inspection. Unless otherwise noted, the lossless operation tests used an 18 s CF4 fluorination condition selected to retain superhydrophobicity while allowing strain-responsive adhesion. Droplet behavior was also tested under repeated stretch/release cycling to confirm that the mechanism was mechanically reversible rather than a one-time wetting transition.
With 18 s CF4 fluorination, the surface retained superhydrophobic contact angles near 160 deg, while the sliding angle could be tuned from approximately 10 deg to 90 deg by mechanical strain. This large change in flow resistance occurred without a visible transition to persistent wetting. Droplet pickup capacity increased with strain: the unstretched surface could not pick up a droplet, whereas the average picked-up volume increased to approximately 3 uL at 50% tensile strain, 8 uL at 100% tensile strain, and 13 uL at 150% tensile strain. The operation sequence is therefore strain-programmed rather than chemistry-programmed. First, strain-induced pinning captures a droplet. Second, a pinned liquid neck can be formed and divided for droplet splitting. Third, the droplet can be carried between paired wrinkle surfaces for transfer. Finally, strain relaxation permits clean detachment. Using this mechanism, a 4 uL droplet was reversibly transferred between two surfaces by changing their relative strain states, and an 8 uL droplet was split on demand. A 10 uL dyed droplet left on a strained fluorinated surface and removed after contact did not produce a discernable wetting trace under bright-field or fluorescence observation. After operations, droplets could also be removed by air blowing without obvious liquid residue, supporting the interpretation that the porous void network prevents persistent Wenzel-type wetting.
This abstract focuses on lossless droplet operation, distinct from the directional-routing function of the related lotus-to-rice poster. The central mechanism is that petal-like pinning captures droplets under strain, while lotus-like trapped air enables clean release after manipulation. By separating temporary adhesion from persistent wetting, the porous wrinkle platform provides a reusable surface for droplet pickup, transfer, splitting, and trapping. The key distinction from permanently adhesive or permanently slippery surfaces is reversibility: the same material can switch between capture and release without requiring new chemical patterning or a sacrificial receiving substrate. This strategy may benefit open-surface microfluidics, small-volume biochemical assays, and contamination-sensitive liquid handling where reversible droplet control is required without sacrificing the superhydrophobic state.