EventsThe 3rd International Online Conference on Biomimetics
Published
This submission belongs to the session S3. Bioinspired Robotics and Locomotion of the event The 3rd International Online Conference on Biomimetics
Published date
19 Nov, 2026
Academic Editor
author-avatarWeixi Huang
Contribution&Funding
Conceptualization,
[Shuichi Wakimoto]
Methodology,
[Daisuke Yamaguchi] ; [Takefumi Kanda]
Validation,
[Kanto Sonoyama] ; [Shuichi Wakimoto]
Investigation,
[Kanto Sonoyama]
Data curation,
[Kanto Sonoyama]
Writing - original draft,
[Kanto Sonoyama]
Writing - review,
[editing] ; [Kanto Sonoyama]
Visualization,
[Kanto Sonoyama]
Project administration,
[Shuichi Wakimoto]
Funding: --
Citation
Kanto Sonoyama, Shuichi Wakimoto, Daisuke Yamaguchi, Takefumi Kanda, Development of a Sensorized Soft Finger with Integrated Wiring and Its Application to a Robotic Hand , in Proceedings of The 3rd International Online Conference on Biomimetics, 24 November–26 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Development of a Sensorized Soft Finger with Integrated Wiring and Its Application to a Robotic Hand 

1. Graduate School of Environment, Life, Natural Science and Technology, Okayama University, Okayama City, 700-8530, Japan
2. Graduate School of Environment, Life, Natural Science and Technology, Okayama University, Okayama city, 700-8530, Japan
Abstract

Soft robotic hands driven by pneumatic soft actuators have been widely investigated as end-effectors for handling objects of various shapes and mechanical properties, owing to their compliance, shape adaptability, and inherent safety during contact. The McKibben artificial muscle is a representative pneumatic soft actuator, which contracts along its axis when pressurized. By reinforcing one side of the muscle or by combining multiple muscles, a finger-like bending motion can be realized, and soft robotic hands based on McKibben artificial muscles have been developed. To enhance the functionality of such hands, it is effective to equip the fingers with sensors for measuring and controlling the grasping force applied to an object. Routing the electrical wiring required for sensor signal transmission, however, remains a challenge, as it increases both the structural complexity and the manufacturing effort. 

 In this study, a soft finger composed of three McKibben artificial muscles and capable of bidirectional bending motion has been developed. In this report, a thin force sensor was placed at its tip so that the grasping force at the fingertip could be measured. Since the sensor must be connected to conductive wires to acquire its signal, a method was established for integrating these wires into the finger structure efficiently while keeping the fabrication process simple. A McKibben artificial muscle has a structure in which an inner tube that receives the pneumatic pressure is covered by a sleeve consisting of multiple helical fibers. By replacing some of these sleeve fibers with enamel-coated copper wires, the fibers essential as the actuator components can also serve directly as sensor signal lines. Moreover, by using a braiding machine, a McKibben artificial muscle incorporating enamel-coated copper wires can be fabricated by the same process as a conventional one. 

 Experimental results confirmed that the force sensor embedded in the fabricated soft finger measured the fingertip grasping force through the integrated wires. In addition, a soft robotic hand with the proposed sensorized finger was constructed, and its capability to measure the grasping force during object handling was demonstrated.

Keywords
Soft robotic hand
Sensorized soft finger
McKibben artificial muscle
Fingertip force measurement
Integrated wiring
Planar-Sensor Biomimetic Compound-Eye Optofluidic Device for Wide-Angle Imaging and Position Estimation
Preliminary Development of a Biomimetic Prehensile Tail Mechanism Using Thin Pneumatic Artificial Muscles